MAX2640

300MHz to 2500MHz SiGe Ultra-Low-Noise Amplifiers


Please check latest availability status for a specific part variant.

Description

The MAX2640/MAX2641 are low-cost, ultra-low-noise amplifiers designed for applications in the cellular, PCS, GPS, and 2.4GHz ISM frequency bands. Operating from a single +2.7V to +5.5V supply, these devices consume only 3.5mA of current while providing a low noise figure, high gain, high input IP3, and an operating frequency range that extends from 300MHz to 2500MHz.

The MAX2640 is optimized for 300MHz to 1500MHz applications, with a typical performance of 15.1dB gain, input IP3 of -10dBm, and a noise figure of 0.9dB at 900MHz. The MAX2641 is optimized for 1400MHz to 2500MHz applications, with a typical performance of 14.4dB gain, an input IP3 of -4dBm, and a noise figure of 1.3dB at 1900MHz.

These devices are internally biased, eliminating the need for external bias resistors and chokes. In a typical application, the only external components needed are a two-element input match, input and output blocking capacitors, and a VCC bypass capacitor.

The MAX2640/MAX2641 are designed on a high-frequency, low-noise, advanced silicon-germanium process and are offered in the space-saving 6-pin SOT23 package.

MAX2640, MAX2641: Typical Operating Circuit MAX2640, MAX2641: Typical Operating Circuit Enlarge+

Key Features

  • Wide Operating Frequency Range
    • MAX2640: 300MHz to 1500MHz
    • MAX2641: 1400MHz to 2500MHz
  • Low Noise Figure
    • MAX2640:
    • 0.9dB at 900MHz
    • MAX2641:
    • 1.2dB at 1575MHz
        1.3dB at 1900MHz
        1.5dB at 2450MHz
  • High Gain
    • MAX2640:
    • 15.1dB at 900MHz
    • MAX2641:
    • 15.7dB at 1575MHz
        14.4dB at 1900MHz
        13.5dB at 2450MHz
  • High Reverse Isolation
    • MAX2640:
    • 40dB at 900MHz
    • MAX2641:
    • 31dB at 1575MHz
        30dB at 1900MHz
        24dB at 2450MHz
  • +2.7V to +5.5V Single-Supply Operation
  • Low 3.5mA Supply Current
  • Ultra-Small SOT23-6 Package

Applications/Uses

  • 400MHz/900MHz/2.4GHz ISM-Band Radios
  • Cellular/PCS Handsets
  • Cordless Phones
  • GPS Receivers
  • Wireless Data
  • Wireless Local Area Networks (WLANs)
Part NumberRF Freq.
(MHz)
RF Freq.
(MHz)
Noise Figure
(dB)
Gain
(dB)
Input IP3
(dBm)
ISUPPLY
(mA)
Footprint
(mm x mm)
Package/PinsBudgetary
Price
minmaxSee Notes
MAX2640 40015000.915.1-103.52.7 x 2.9
SOT23/6
$1.64 @1k
MAX2641 140025001.314.4-45.3
SOT23/6
$1.15 @1k
See All Low-Noise Amplifiers (42)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX2640EVKIT: Evaluation Kit for the MAX2640/MAX2641
MAX2641EVKIT: Evaluation Kit for the MAX2640/MAX2641
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX5871
16-Bit, 5.9Gsps Interpolating and Modulating RF DAC with JESD204B Interface

  • Simplifies RF Design and Enables New Wireless Communication Architectures
  • Direct RF Synthesis of 600MHz Bandwidth Up to 2.8GHz
  • Highly Flexible and Configurable