MAX2307

Low-Power, Cellular Upconverter-Driver

Low-Power, Cellular Upconverter Drives IC in Ultra-Chip-Scale Package


Please check latest availability status for a specific part variant.

Description

The MAX2307 is an integrated RF upconverter-driver optimized for the Japanese cellular frequency band. It can also be used for applications in the US cellular and ISM bands. Its low current consumption (15mA at -15dBm output) extends the average talk time.

The image rejection is done using only two external inductors at the upconverter output because the image frequency in Japanese cellular phones is typically 330MHz away. This realizes the image rejection with no current consumption penalty and only two inexpensive off-chip components, saving cost and valuable board space.

The MAX2307 has a separate shutdown control for the LO buffer to minimize VCO pulling. It comes in an ultra-small 3x4 ultra-chipscale package (UCSP).

Key Features

  • Ultra-Small Implementation Size
  • Low Off-Chip Component Count
  • 15mA at -15dBm POUT
  • 34mA at +6.5dBm POUT and -53dBc ACPR
  • <1µA Shutdown Mode
  • Separate Shutdown for LO Buffer
  • No External Logic Interface Circuitry Required

Applications/Uses

  • Data Acquisition

Technical Documents

Tutorial 5100 General Layout Guidelines for RF and Mixed-Signal PCBs

Quality and Environmental Data

Request Reliability Report for: MAX2307 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources