+2.7V, Single-Supply, Cellular-Band Linear Power Amplifiers
Industry's Best Overall Efficiency, Single-Supply, Dual-Mode CDMA Power Amplifier for the Japanese 900MHz Market
DescriptionThe MAX2267/MAX2268/MAX2269 power amplifiers are optimized for IS-98-based CDMA and PDC cellular telephones operating in the Japanese cellular-frequency band. When matched for CDMA operation, the amplifiers achieve 27dBm output power with 35% efficiency (MAX2268), with margin over the adjacent and alternate channel specification. At a +17dBm output-a very common power level for CDMA phones-the MAX2268 still has 7% efficiency, yielding excellent overall talk time. At the same power level, the MAX2267/MAX2269 have an unprecedented 12%/17% efficiency, while still obtaining 28%/29% efficiency at maximum output power.
The MAX2267/MAX2268/MAX2269 have internally referenced bias ports that are normally terminated with simple resistors. The bias ports allow customization of ACPR margin and gain. They can also be used to "throttle back" bias current when generating low power levels. The MAX2267/MAX2268/MAX2269 have excellent gain stability over temperature (±0.8dB), so over-design of driver stages and excess driver current are dramatically reduced, further increasing the phone's talk time. The devices can be operated from +2.7V to +4.5V while meeting all ACPR specifications over the entire temperature range.
The devices are packaged in a 16-pin TSSOP with exposed paddle (EP). For module or direct chip attach applications, the MAX2267 is also available in die form.
- Low Average CDMA Current Consumption in Typical Urban Scenario
- 55mA (MAX2267)
- 90mA (MAX2268)
- 50mA (MAX2269)
- 0.5µA Shutdown Mode Eliminates External Supply Switch
- ±0.8dB Gain Variation Over Temperature
- No External Reference or Logic Interface Circuitry Needed
- Supply Current and ACPR Margin Dynamically Adjustable
- +2.7V to +4.5V Single-Supply Operation
- 35% Efficiency at +2.7V Operation
- 2-Way Pagers
- Cellular-Band CDMA Phones
- Cellular-Band PDC Phones
- Power-Amplifier Modules
|Device||Fab Process||Technology||Sample size||Rejects||FIT at 25°C||FIT at 55°C||Material Composition|
|Evaluation Board||2184||MAX2268EVKIT Evaluation Kit for the MAX2267, MAX2268, MAX2269|
|Evaluation Board||2184||MAX2267EVKIT Evaluation Kit for the MAX2267, MAX2268, MAX2269|
|Evaluation Board||2184||MAX2269EVKIT Evaluation Kit for the MAX2267, MAX2268, MAX2269|