LF-to-2.5GHz Dual Logarithmic Detector/Controller for Power, Gain, and VSWR Measurements

Dual RF Power Detector Delivers 80dB Dynamic Range at 900MHz

Please check latest availability status for a specific part variant.


The MAX2016 dual logarithmic detector/controller is a fully integrated system designed for measuring and comparing power, gain/loss, and voltage standing-wave ratio (VSWR) of two incoming RF signals. An internal broadband impedance match on the two differential RF input ports allows for the simultaneous monitoring of signals ranging from low frequency to 2.5GHz.

The MAX2016 uses a pair of logarithmic amplifiers to detect and compare the power levels of two RF input signals. The device internally subtracts one power level from the other to provide a DC output voltage that is proportional to the power difference (gain). The MAX2016 can also measure the return loss/VSWR of an RF signal by monitoring the incident and reflected power levels associated with any given load. A window detector is easily implemented by using the on-chip comparators, OR gate, and 2V reference. This combination of circuitry provides an automatic indication of when the measured gain is outside a programmable range. Alarm monitoring can thus be implemented for detecting high-VSWR states (such as open or shorted loads).

The MAX2016 operates from a single +2.7V to +5.25V* power supply and is specified over the extended -40°C to +85°C temperature range. The MAX2016 is available in a space-saving, 5mm x 5mm, 28-pin thin QFN.

MAX2016: Typical Application Circuit MAX2016: Typical Application Circuit Enlarge+

Key Features

  • Complete Gain and VSWR Detector/Controller
  • Dual-Channel RF Power Detector/Controller
  • Low-Frequency to 2.5GHz Frequency Range
  • Exceptional Accuracy Over Temperature
  • High 80dB Dynamic Range
  • 2.7V to 5.25V Supply Voltage Range*
  • Internal 2V Reference
  • Scaling Stable Over Supply and Temperature Variations
  • Controller Mode with Error Output
  • Available in 5mm x 5mm, 28-Pin Thin QFN Package


  • Cellular Base Station, Microwave Link, Radar
  • Dual-Channel Precision AGC/RF Power Control
  • Dual-Channel RF Power Measurements Log Ratio Function for RF Signals
  • Military Applications
  • Remote System Monitoring and Diagnostics
  • Return Loss/VSWR Measurements
  • RF/IF Power Amplifier (PA) Linearization
Part Number Detector Type Dynamic Range
RF Freq.
(mm x mm)
Oper. Temp.
Package/Pins Budgetary
max 50Ω Term See Notes
MAX2016  Log. Amp. 80 2.7 to 5.25 43 2500 -70 to +10 5.0 x 5.0 -40 to +85
$12.35 @1k
See All RF Power Detectors (12)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

Related Resources