MAX2130

Broadband, Two-Output, Low-Noise Amplifier for TV Tuner Applications

Broadband, Low-Noise Amplifier Has Differential Outputs and On-Chip Op Amp


Please check latest availability status for a specific part variant.

Description

The MAX2130 broadband, low-distortion, low-noise, two-output amplifier performs preamp, loop-out, and buffer functions in TV tuner applications. The device integrates functions typically achieved with discrete components into the space-saving 8-pin µMAX-EP package. The MAX2130 provides a gain of +15dB with a noise figure less than 3.2dB over the 44MHz to 878MHz frequency range. The MAX2130 features an externally adjustable bias control, set with a single resistor, that allows the user to meet minimum linearity requirements while reducing current consumption. The device operates from a +5V single supply and only requires 93mA of supply current when nominally biased.
MAX2130: Typical Application Circuit MAX2130: Typical Application Circuit Enlarge+

Key Features

  • +5V Single-Supply Operation
  • 44MHz to 878MHz Operating Frequency Range
  • Guaranteed 7.4dB (min) Input Return Loss Over Frequency Range
  • LNA Performance at ICC = 93mA (RBIAS = 15kΩ)
    • 15dB Gain
    • 2.8dB Noise Figure
    • +17.5dBm Input IP3
    • +27dBm Input IP2
    • +2.7dBm Input 1dB Compression Point
  • Loop-Out Amplifier Performance at ICC = 93mA (RBIAS = 15kΩ)
    • 8.7dB Gain
    • 4.2dB Noise Figure
    • +17dBm Input IP3
    • +29dBm Input IP2
    • -0.5dBm Input 1dB Compression Point
  • Programmable Linearity vs. Supply Current

Applications/Uses

  • Analog TV Tuners
  • Cable Modems
  • Digital/Terrestrial TV Tuners
  • DVB-T Digital Broadcast Receivers
  • Set-Top Boxes
Part NumberISUPPLY
(mA)
Package/PinsBudgetary
Price
See Notes
MAX2130 93
UMAX/8
$1.06 @1k
See All CATV and Upstream Amplifiers (1)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Technical Documents

Tutorial 972 CATV Minimum Loss Pad for 75Ω Measurements

Quality and Environmental Data

Request Reliability Report for: MAX2130 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources