DS26514

4-Port T1/E1/J1 Transceiver

4-Port Transceiver with Low-Power Consumption and Price


Please check latest availability status for a specific part variant.

Description

The DS26514 is a 4-port framer and line interface unit (LIU) combination for T1, E1, J1 applications. Each port is independently configurable, supporting both long-haul and short-haul lines. The DS26514 single-chip transceiver (SCT) is software and pinout compatible with the 8-port DS26518. It is nearly software compatible with the DS26528 and its derivatives.
DS26514: Functional Diagram DS26514: Functional Diagram Enlarge+

Key Features

  • Four Complete T1, E1, or J1 Long-Haul/Short-Haul Transceivers (LIU Plus Framer)
  • Independent T1, E1, or J1 Selections for Each Transceiver
  • Fully Internal Impedance Match, No External Resistor
  • Software-Selectable Transmit- and Receive-Side Termination for 100Ω T1 Twisted Pair, 110Ω J1 Twisted Pair, 120Ω E1 Twisted Pair, and 75Ω E1 Coaxial Applications
  • Hitless Protection Switching
  • Crystal-Less Jitter Attenuators Can Be Selected for Transmit or Receive Path; Jitter Attenuator Meets ETS CTR 12/13, ITU-T G.736, G.742, G.823, and AT&T Pub 62411
  • External Master Clock Can Be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock is Internally Adapted for T1 or E1 Usage in the Host Mode
  • Receive-Signal Level Indication from -2.5dB to -36dB in T1 Mode and -2.5dB to -44dB in E1 Mode in Approximate 2.5dB Increments
  • Transmit Open- and Short-Circuit Detection
  • LIU LOS in Accordance with G.775, ETS 300 233, and T1.231
  • Transmit Synchronizer
  • Flexible Signaling Extraction and Insertion Using Either the System Interface or Microprocessor Port
  • Alarm Detection and Insertion
  • T1 Framing Formats of D4, SLC-96, and ESF
  • J1 Support
  • E1 G.704 and CRC-4 Multiframe
  • T1-to-E1 Conversion

Applications/Uses

  • Channel Banks
  • Channel Service Units (CSUs)
  • Data Service Units (DSUs)
  • Muxes
  • Routers
  • Switches
  • T1/E1 Test Equipment

CAD Symbols and Footprints

  • DS26514GN
  • DS26514GN+
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX5871
    16-Bit, 5.9Gsps Interpolating and Modulating RF DAC with JESD204B Interface

    • Simplifies RF Design and Enables New Wireless Communication Architectures
    • Direct RF Synthesis of 600MHz Bandwidth Up to 2.8GHz
    • Highly Flexible and Configurable



    Electronics in Vehicles (ELIV) 2019
    10/16/2019 - 10/17/2019, Bonn, Germany
    The international VDI Congress ELIV (Electronics In Vehicles) is THE event for all experts in the field of electrical and electronical car engineering and integration of mechanical and electronical systems.

    RSVP