3.3V/5V Clock Rate Adapter

Telecom Clock Adapters for T1 and E1 Rate Conversion

Please check latest availability status for a specific part variant.


The DS21610 is a multirate, low-jitter clock adapter that converts E-carrier and T-carrier clocks to multiple PDH carrier clock rates. Two clock outputs are available that are frequency-locked to the input clock. The clock outputs along with an 8kHz framesync output can be phase-aligned to a frame-sync input. The device is backward compatible with the LXP610 and operates from either a 3.3V or 5V supply. All modes of operation include a standard 8kHz output.
DS21610, DS21610QN, DS21610SN: Block Diagram DS21610, DS21610QN, DS21610SN: Block Diagram Enlarge+

Key Features

  • Direct Replacement for LXP610SE
  • Converts E-Carrier Clock Rates to T-Carrier Clock Rates
  • Converts T-Carrier Clock Rates to E-Carrier Clock Rates
  • 3.3V or 5V Supply
  • Low Jitter Output
  • Multiple Output Clocks Synchronized to Input Clock
  • 8kHz Frequency-Locked Output for all Operation Modes
  • No External Components Required
  • 16-Pin SO and 28-Pin PLCC
  • Industrial Temperature Range: -40ºC to +85ºC
Request Reliability Report for: DS21610QN 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources

290MHz to 960MHz ASK/FSK Receiver with SPI Interface

  • Low Bill of Materials (BOM)
  • Long Range with High Sensitivity
  • Low Power Consumption