Top

10-Bit, Low-Power, 2-Wire Interface, Serial, Voltage-Output DAC

Ultra-Low Power, Tiny SOT23 I²C Interface 10- and 12-Bit DACs

Product Details

Key Features

Parametric specs for Precision DACs (< 1MHz)
Resolution (bits) 10
# Channels 1
Interface Serial - I2C
Output Type Voltage- Buffered
Reference Ext.
INL (±LSB) (max) 4
Supply Range (V) (min) 2.7
Supply Range (V) (max) 5.5
ICC (mA) (max) 0.19
Settling Time (µs) (typ) 4
Package/Pins SOT23/6
Oper. Temp. (°C) -40 to +85
Budgetary
Price (See Notes)
2.22
View Less

Simplified Block Diagram

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Parameters

Parametric specs for Precision DACs (&lt; 1MHz)
Resolution (bits) 10
# Channels 1
Interface Serial - I2C
Output Type Voltage- Buffered
Reference Ext.
INL (±LSB) (max) 4
Supply Range (V) (min) 2.7
Supply Range (V) (max) 5.5
ICC (mA) (max) 0.19
Settling Time (µs) (typ) 4
Package/Pins SOT23/6
Oper. Temp. (°C) -40 to +85
Budgetary
Price (See Notes)
2.22

Key Features

  • Ultra-Low Supply Current
    • 100µA at VDD = 3.6V
    • 130µA at VDD = 5.5V
  • 300nA Low-Power Power-Down Mode
  • Single 2.7V to 5.5V Supply Voltage
  • Fast 400kHz I²C-Compatible 2-Wire Serial Interface
  • Schmitt-Trigger Inputs for Direct Interfacing to Optocouplers
  • Rail-to-Rail Output Buffer Amplifier
  • Three Software-Selectable Power-Down Output Impedances
    • 100kΩ, 1kΩ, and High Impedance
  • Read-Back Mode for Bus and Data Checking
  • Power-On Reset to Zero
  • Miniature 6-Pin SOT23 Package

Applications/Uses

  • Battery-Powered Applications
  • Digital Gain and Offset Control
  • Low-Cost Instrumentation
  • Programmable Attenuators
  • Programmable Voltage and Current Sources
  • VCO/Varactor Diode Control

Description

The MAX5811 is a single, 10-bit voltage-output digital-to-analog converter (DAC) with an I²C-compatible 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 100µA at VDD = 3.6V. A low-power power-down mode decreases current consumption to less than 1µA. The MAX5811 features three software-selectable power-down output impedances: 100kΩ, 1kΩ, and high impedance. Other features include an internal precision Rail-to-Rail output buffer and a power-on reset (POR) circuit that powers up the DAC in the 100kΩ power-down mode.

The MAX5811 features a double-buffered I²C-compatible serial interface that allows multiple devices to share a single bus. All logic inputs are CMOS-logic compatible and buffered with Schmitt triggers, allowing direct interfacing to optocoupled and transformer-isolated interfaces. The MAX5811 minimizes digital noise feedthrough by disconnecting the clock (SCL) signal from the rest of the device when an address mismatch is detected. The MAX5811 is specified over the extended temperature range of -40°C to +85°C and is available in a space-saving 6-pin SOT23 package. Refer to the MAX5812 data sheet for the 12-bit version.

Simplified Block Diagram

MAX5811: Typical Operating Circuit MAX5811: Typical Operating Circuit Zoom icon

Technical Docs

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .