Product Details
Key Features
Applications/Uses
Resolution (bits) | 10 |
# Channels | 4 |
Interface | Serial - SPI |
Output Type | Voltage- Buffered |
Reference | Ext. |
INL (±LSB) (max) | 1 |
Supply Range (V) (min) | 4.5 |
Supply Range (V) (max) | 5.5 |
ICC (mA) (max) | 0.98 |
Settling Time (µs) (typ) | 10 |
Package/Pins | PDIP/20 SSOP/20 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Budgetary Price (See Notes) | 7.54 |
Simplified Block Diagram
Technical Docs
Data Sheet | Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial Interface | Dec 19, 2002 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Parameters
Resolution (bits) | 10 |
# Channels | 4 |
Interface | Serial - SPI |
Output Type | Voltage- Buffered |
Reference | Ext. |
INL (±LSB) (max) | 1 |
Supply Range (V) (min) | 4.5 |
Supply Range (V) (max) | 5.5 |
ICC (mA) (max) | 0.98 |
Settling Time (µs) (typ) | 10 |
Package/Pins | PDIP/20 SSOP/20 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Budgetary Price (See Notes) | 7.54 |
Key Features
- Four 10-Bit DACs with Configurable Output Amplifiers
- +5V Single-Supply Operation
- Low Supply Current: 0.85mA Normal Operation 10µA Shutdown Mode
- Available in 20-Pin SSOP and DIP Packages
- Power-On Reset Clears all Registers and DACs to Zero
- SPI/QSPI and Microwire Compatible
- Simultaneous or Independent Control of DACs through 3-Wire Serial Interface
- User-Programmable Digital Output
- Schmitt-Trigger Inputs for Direct Optocoupler Interface
- 12-Bit Upgrade Available: MAX525
Applications/Uses
- Automated Test Equipment (ATE)
- Digital Offset and Gain Adjustments
- Industrial Process Controls
- Microprocessor-Controlled Systems
- Motion Control
- Remote Industrial Controls
Description
Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16-bit serial word loads data into each input/DAC register. The 3-wire serial interface is compatible with SPI/QSPI and Microwire. It allows the input and DAC registers to be updated independently or simultaneously with a single software command. All logic inputs are TTL/CMOS-logic compatible.
Technical Docs
Data Sheet | Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial Interface | Dec 19, 2002 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.