+3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs

Ultra Small 14-Bit DAC in a µMAX Package Offers Low-Power Solution

Please check latest availability status for a specific part variant.


The MAX5141—MAX5144 are serial-input, voltage-output, 14-bit digital-to-analog converters (DACs) in tiny µMAX® packages, 50% smaller than comparable DACs in an 8-pin SO. They operate from low +3V (MAX5143/MAX5144) or +5V (MAX5141/MAX5142) single supplies. They provide 14-bit performance (±1 LSB INL and DNL) over temperature without any adjustments. The DAC output is unbuffered, resulting in a low supply current of 120µA and a low offset error of 2 LSBs.

The DAC output range is 0V to VREF. For bipolar operation, matched scaling resistors are provided in the MAX5142/MAX5144 for use with an external precision op amp (such as the MAX400), generating a ±VREF output swing. A 16-bit serial word is used to load data into the DAC latch. The 25MHz, 3-wire serial interface is compatible with SPI™/QSPI™/MICROWIRE™, and can interface directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144) when power is initially applied. A logic low on active-low CLR asynchronously clears the DAC output to code 0 (MAX5141/MAX5143) or code 8192 (MAX5142/MAX5144), independent of the serial interface. The MAX5141/MAX5143 are available in 8-pin µMAX packages and the MAX5142/MAX5144 are available in 10-pin µMAX packages.
MAX5141, MAX5142, MAX5143, MAX5144: Functional Block Diagrams MAX5141, MAX5142, MAX5143, MAX5144: Functional Block Diagrams Enlarge+

Key Features

  • Ultra-Small (3mm x 5mm) 8-Pin µMAX Package
  • Low 120µA Supply Current
  • Fast 1µs Settling Time
  • 25MHz SPI/QSPI/MICROWIRE-Compatible Serial Interface
  • VREF Range Extends to VDD
  • +5V (MAX5141/MAX5142) or +3V (MAX5143/MAX5144) Single-Supply Operation
  • Full 14-Bit Performance Without Adjustments
  • Unbuffered Voltage Output Directly Drives 60kΩ Loads
  • Power-On Reset Circuit Clears DAC Output to Code 0 (MAX5141/MAX5143) or Code 8192 (MAX5142/MAX5144)
  • Schmitt-Trigger Inputs for Direct Optocoupler Interface
  • Asynchronous Active-Low CLR


  • Automated Test Equipment (ATE)
  • Data Acquisition
  • High-Resolution and Gain Adjustment
  • Industrial Process Controls

See parametric specs for Precision DACs (248)

Part NumberResolution
ChannelsOutput TypeReferenceINL
InterfaceSupply Range
Supply Range
Settling Time
Package/PinsOper. Temp.
maxminmaxmaxtypSee Notes
MAX5141 141Voltage- UnbufferedExt.1Serial - SPI4.55.50.21
-40 to +85$7.43 @1k
MAX5142 4.55.5
$6.17 @1k
MAX5143 2.73.6
$6.17 @1k
MAX5144 2.73.6
$7.96 @500

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Product Reliability Reports: MAX5143.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources