/
/
/
Data Converters 
/
Digital-to-Analog Converters
Digital-to-Analog Converters
Top
/content/maximintegrated/en/products/analog/data-converters/digital-to-analog-converters 
Digital-to-Analog Converters
Our comprehensive porfolio of digital-to-analog converter (DAC) ICs is one of the largest in the industry offering devices with resolution from 4 to 18 bits and sampling rates over 4Gsps.
Precision DAC Selector Guide
Maxim offers one of the largest selections of digital to analog converters (DACs) in the industr...
Also see:
Calibration ICs
Technical Documentation
Technical Documents
Showing 10 of View Top 100 Results View All Results
Part Number   | Title | Document Type | Date |
|---|
Latest Blogs
How PA Linearization Solves Key Challenge for Remote PHY Fiber Nodes
October 13, 2017
Learn how an open-loop DPD solution reduces power and complexity in cable remote PHY fiber nodes.
Featured Products
MAX5550 Dual, 10-Bit, Programmable, 30mA High-Output-Current DAC
The MAX5550 dual, 10-bit, digital-to-analog converter (DAC) features high-output-current capabil...
- Pin-Selectable I²C- or SPI-Compatible Interface
- Guaranteed Low Output Leakage Current in Shutdown (±1µA max)
- Guaranteed Monotonic over Extended Temperature Range
- Dual Outputs for Balanced Systems
- Current Outputs Source Up to 30mA per DAC
- Parallelable Outputs for 60mA Applications
- Output Stable with RF Filters
- Internal or External Reference Capability
- Digital Output (DOUT) Available for Daisy Chaining in SPI Mode
- +2.7V to +5.25V Single-Supply Operation
- 16-Pin (3mm x 3mm) Thin QFN Package
- Programmable Output Current Range Set by Software and Adjustment Resistor
MAX5825 Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Eight High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
- Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX5715 Ultra-Small, Quad-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and SPI Interface
The MAX5713/MAX5714/MAX5715 4-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Four High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 5mm x 4.4mm 14-Pin TSSOP or Ultra-Small 1.6mm x 2.2mm 12-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- 50MHz 3-Wire SPI/QSPI/MICROWIRE/DSP-Compatible Serial Interface with Active-Low RDY Output
- Power-On-Reset to Zero-Scale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX5216 14-/16-Bit, Low-Power, Buffered Output, Rail-to-Rail DACs with SPI Interface
The MAX5214/MAX5216 are pin-compatible, 14-bit and 16-bit digital-to-analog converters (DACs). T...
- Low-Power Consumption (80µA max)
- 14-/16-Bit Resolution in a 3mm x 5mm, 8-Pin µMAX Package
- Relative Accuracy
- ±0.40 LSB INL (MAX5214, 14-Bit typ, ±1 LSB max)
- ±1.2 LSB INL (MAX5216, 16-Bit typ, ±4 LSB max)
- Guaranteed Monotonic Over All Operating Ranges
- Low Gain and Offset Error
- Wide 2.7V to 5.5V Supply Range
- Rail-to-Rail Buffered Output Operation
- Safe Power-On Reset (POR) to Zero DAC Output
- Fast 50MHz, 3-Wire, SPI/QSPI/MICROWIRE-Compatible Serial Interface
- Schmitt-Trigger Inputs for Direct Optocoupler Interface
- Asynchronous Active-Low CLR Clears DAC Output to Code 0
- High Reference Input Resistance for Power Reduction
- Buffered Voltage Output Directly Drives 10kΩ Loads
MAX5854 Dual, 10-Bit, 165Msps, Current-Output DAC
The MAX5854 dual, 10-bit, 165Msps digital-to-analog converter (DAC) provides superior dynamic pe...
- 10-Bit, 165Msps Dual DAC
- Low Power
- 190mW with IFS = 20mA at fCLK = 165MHz
- 2.7V to 3.6V Single Supply
- Full Output Swing and Dynamic Performance at 2.7V Supply
- Superior Dynamic Performance
- 73dBc SFDR at fOUT = 40MHz
- UMTS ACLR = 65.5dB at fOUT = 30.7MHz
- Programmable Channel Gain Matching
- Integrated 1.24V Low-Noise Bandgap Reference
- Single-Resistor Gain Control
- Interleaved Data Mode
- Single-Ended and Differential Clock Input Modes
- Miniature 40-Pin TQFN Package, 6mm x 6mm
- EV Kit Available—MAX5854 EV Kit
MAX22000 Industrial Configurable Analog I/O
The MAX22000 is an industrial-grade configurable analog input/output device that can be configur...
- Accurate
- AOVM Mode:
- 0.02%FSR Accuracy, Room Temp
- 0.1%FSR Accuracy, ±50°C Temp Variation
- 5ppm/°C Internal Reference
- AOVM Mode:
- Flexible
- 6 Analog Inputs/1 Analog Output Using Software Configurable Voltage and Current
- Two Auxiliary ADC Inputs for Cold Junction Measurements
- RTD Input Mode in 2, 3, or 4-Wire Configurations
- Thermocouple Input Mode
- ±12.5V Input/Output Voltage Range
- ±25mA or ±2.5mA Output Current Range
- ±25V, ±2.5V, ±500mV, ±250mV, and ±125mV PGA Input Voltage Ranges
- +24V Field Supply for Current Loop
- Optional External Reference for ADC and/or DAC
- Six GPIOs
- 20MHz SPI Interface
- Robust
- ±36V Protection on All Analog I/O Ports
- Overcurrrent Protection
- Thermal Shutdown
- Undervoltage Interrupt on All High Voltage Supplies
- CRC Detection
- Open Detection on All Analog Inputs
- 2kV HBM Protection on All Pins
- -40°C to +125°C Operating Temperature Range
- Small 9mm x 9.5mm 64-Pin LGA Package
MAX5861 DOCSIS 3.1 High-Density SCQAM and OFDM Downstream Cable Modulator
The MAX5861 is an integrated, high-density, SCQAM and OFDM downstream cable modulator, digital u...
- High-Density Cable Downstream Modulator
- Combine Up to Six 192MHz Blocks of 32 x 6MHz SCQAM Channels and DOCSIS 3.1 OFDM Channels
- Integrated 14-Bit 4.9152Gsps RF-DAC
- Highly Flexible and Configurable
- ITU-T J.83 Annex A, B, and C SCQAM Channels
- IFFT Processing D3.1 OFDM Channels
- LVDS or SSTL 1.2/1.5 DDR Data Ports
- One 10-Bit SCQAM Port with 160-Channel Capacity
- Two 9-Bit OFDM Ports with 6 OFDM-Channel Capacity
- Channel Bandwidths:
- 1MHz to 8MHz SCQAM
- 24MHz/48MHz/96MHz/192MHz OFDM
- 192MHz IFFT Bypass Mode
- Full SCQAM Agility within 192MHz Block
- Block Agility within 1218MHz Output Bandwidth
- Additional Features Ease RF Design
- Programmable Digital Predistortion
- High Output Power: 9dBm (Peak CW)
- Low-Power, Compact Solution
- 5.9W with 128 SCQAMs + 2 OFDM Channels
- Operating Temperature Range TA = -40°C to TJ = +110°C
- 12mm x 18mm, 308-Ball LFBGA
MAX5824 Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Eight High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
- Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX5823 Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Eight High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
- Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX11301 PIXI, 20-Port Programmable Mixed-Signal I/O with 12-Bit ADC, 12-Bit DAC, Analog Switches, and GPIO
The MAX11301 integrates a PIXIâ„¢, 12-bit, multichannel, analog-to-digital converter (ADC) and a 1...
- 20 Configurable Mixed-Signal Ports Maximize Design Flexibility Across Platforms
- Up to 20 12-Bit ADC Inputs
- Single-Ended, Differential, or Pseudo-Differential
- Range Options: 0 to 2.5V, ±5V, 0 to +10V, -10V to 0V
- Programmable Sample Averaging Per ADC Port
- Unique Voltage Reference for Each ADC PIXI Port
- Up to 20 12-Bit DAC Outputs
- Range Options: ±5V, 0 to +10V, -10V to 0V
- 25mA Current Drive Capability with Overcurrent Protection
- Up to 20 General-Purpose Digital I/Os
- 0 to +5V GPI Input Range
- 0 to +2.5V GPI Programmable Threshold Range
- 0 to +10V GPO Programmable Output Range
- Logic-Level Shifting Between Any Two Pins
- 60Ω Analog Switch Between Adjacent PIXI Ports
- Internal/External Temperature Sensors, ±1°C Accuracy
- Up to 20 12-Bit ADC Inputs
- Adapts to Specific Application Requirements and Allows for Easy Reconfiguration as System Needs Change
- Configurability of Functions Enables Optimized PCB Layout
- Reduces BOM Cost with Fewer Components in Small Footprint
- 36mm² 40-Pin TQFN
- 49mm² 48-Pin TQFP
MAX5717 16- and 20-Bit Voltage DACs
The MAX5717 and MAX5719 are serial-input, unbuffered 16 and 20-bit voltage-output unipolar digit...
- 16 and 20-Bit resolution
- 1LSB INL (Max, 16-bit)
- ±0.5 LSB DNL (Max, 16-Bit)
- 750ns Settling Time (typ)
- 0.05 nV-sec Glitch Energy
- 6nv/√Hz Output Noise Density
- Integrated ±0.025% (max) Bipolar Setting Resistors
- 4.5V to 5.5V Supply Range
- 4.0V to VDD Reference Input Range
- Safe Power-Up Reset-to-Zero-Scale DAC Output (Unipolar)
- 50MHz 3-Wire SPI Interface
- -40°C to +105°C Operating Temperature Range.
- SO-14 Package
MAX5719 16- and 20-Bit Voltage DACs
The MAX5717 and MAX5719 are serial-input, unbuffered 16 and 20-bit voltage-output unipolar digit...
- 16 and 20-Bit resolution
- 1LSB INL (Max, 16-bit)
- ±0.5 LSB DNL (Max, 16-Bit)
- 750ns Settling Time (typ)
- 0.05 nV-sec Glitch Energy
- 6nv/√Hz Output Noise Density
- Integrated ±0.025% (max) Bipolar Setting Resistors
- 4.5V to 5.5V Supply Range
- 4.0V to VDD Reference Input Range
- Safe Power-Up Reset-to-Zero-Scale DAC Output (Unipolar)
- 50MHz 3-Wire SPI Interface
- -40°C to +105°C Operating Temperature Range.
- SO-14 Package
MAX5850 14-Bit 3.072Gsps RF DAC
The MAX5850 is a 14-Bit, 3.072Gsps digital-to-analog converter (DAC) and can directly synthesize...
- Simplifies RF Design and Enables New Communication Architectures
- Enables Multi-Band RF Modulation
- Direct RF Synthesis of 1.5GHz Bandwidth
- 3.072Gsps DAC Output Update Rate
- High-Performance 14-Bit RF DAC Core
- Highly Flexible and Configurable
- 6-Lane JESD204B Input Data Interface
- 10.24Gbps Serial Data Rate
- Subclass-0 Compliant
- Divided Reference Clock Output
- SPI Interface for Device Configuration
MAX5882 14-Bit, 4.6Gsps Cable Downstream Direct RF Synthesis DAC
The MAX5882 14-bit, 4.6Gsps digital-to-analog converter (DAC) is designed for direct RF synthesi...
- 4.6Gsps Output Update Rate
- Direct RF Synthesis from 47MHz to 1003MHz
- No Aliasing of HD3 into Cable Band
- Industry-Leading DOCSIS 3.0 Performance Noise Floor
- -70dBc at fOUT = 900MHz, 8 Channel (256 QAM)
- -66dBc at fOUT = 900MHz, 16 Channel (256 QAM)
- -62dBc at fOUT = 900MHz, 32 Channel (256 QAM)
- -57dBc at fOUT = 500MHz, 128 Channel (256 QAM)
- High Output Power 9dBm (CW)
- Enables Low Solution Power
- 4:1 Multiplexed LVDS Inputs
- Up to 1150Mwps Each Port
- Double Data Rate (DDR) Mode
- On-Chip DLL for Input Data Synchronization
- Parity Error Flag
- Internal 50Ω Differential Output Termination
- Input Register Scan Mode
- Compact 17mm × 17mm, 256 CSBGA Package
- Evaluation Kit Available (Order MAX5882EVKIT+)
DS4424 Two-/Four-Channel, I²C, 7-Bit Sink/Source Current DAC
The DS4422 and DS4424 contain two or four I²C programmable current DACs that are each capable of...
- Two (DS4422) or Four (DS4424) Current DACs
- Full-Scale Current 50µA to 200µA
- Full-Scale Range for Each DAC Determined by External Resistors
- 127 Settings Each for Sink and Source Modes
- I²C-Compatible Serial Interface
- Two Address Input Pins Allow Four Devices on Same I²C Bus
- Low Cost
- Small Package (14-Pin, 3mm x 3mm TDFN)
- -40°C to +85°C Temperature Range
- 2.7V to 5.5V Operating Range
DS4422 Two-/Four-Channel, I²C, 7-Bit Sink/Source Current DAC
The DS4422 and DS4424 contain two or four I²C programmable current DACs that are each capable of...
- Two (DS4422) or Four (DS4424) Current DACs
- Full-Scale Current 50µA to 200µA
- Full-Scale Range for Each DAC Determined by External Resistors
- 127 Settings Each for Sink and Source Modes
- I²C-Compatible Serial Interface
- Two Address Input Pins Allow Four Devices on Same I²C Bus
- Low Cost
- Small Package (14-Pin, 3mm x 3mm TDFN)
- -40°C to +85°C Temperature Range
- 2.7V to 5.5V Operating Range
MAX11262 14-Bit, 500ksps, +5V Unipolar Input, SAR ADC, in Tiny 10-Pin µMAX
The MAX11262 is a 14-bit, 500ksps, +5V unipolar pseudo-differential input SAR ADC offering excel...
- High DC/AC Accuracy Improves Measurement Quality
- 14-Bit Resolution with No Missing Codes
- 500ksps Throughput Rates without Pipeline Delay/Latency
- 85.4dB SNR and -102dB THD at 10kHz
- 0.1 LSBRMSTransition Noise
- ±0.12 LSB DNL (typ) and ±0.2 LSB INL (typ)
- Wide Supply Range and Low Power Simplify Power-Supply Design
- 5V Analog Supply
- 2.3V to 5V Digital Supply
- 23.5mW Power Consumption at 500ksps
- 10µA in Shutdown Mode
- Multi-Industry Standard Serial Interface and Small Package Reduce Size
- SPI/QSPI™/MICROWIRE®/DSP-Compatible Serial Interface
- 3mm x 5mm, Tiny 10-Pin µMAX Package
MAX5712 Low-Power, 12-Bit, Rail-to-Rail Voltage-Output Serial DAC in SOT23
The MAX5712 is a small footprint, low-power, 12-bit digital-to-analog converter (DAC) that opera...
- Wide -40°C to +125°C Operating Temperature Range
- Low 85µA Supply Current
- Ultra Low 0.3µA Power-Down Supply Current
- Single +2.7V to +5.5V Supply Voltage
- Fast 20MHz 3-Wire SPI/QSPI/MICROWIRE and DSP-Compatible Serial Interface
- Schmitt-Triggered Inputs for Direct Interfacing to Optocouplers
- Rail-to-Rail Output Buffer
- Tiny 6-Pin SOT23 Package
- Power-On Reset to 0V
- Three Software-Selectable Power-Down Output Impedances (100kΩ, 1kΩ, Hi-Z)
MAX11154 18-Bit, 500ksps, 0 to 5V SAR ADC with Internal Reference in TDFN
The MAX11154 18-bit, 500ksps, SAR ADC offers excellent AC and DC performance with unipolar input...
- High DC/AC Accuracy Improves Measurement Quality
- 18-Bit Resolution with No Missing Codes
- 500ksps Throughput Rates without Pipeline Delay/Latency
- 93.8dB SNR and -105dB THD at 10kHz
- 1.7 LSBRMS Transition Noise
- ±0.6 LSB DNL (typ) and ±2 LSB INL (typ)
- Highly Integrated ADC Saves Cost and Space
- ±7ppm/°C Internal Reference
- Internal Reference Buffer
- Wide Supply Range and Low Power Simplify Power-Supply Design
- 5V Analog Supply
- 2.3V to 5V Digital Supply
- 23.6mW Power Consumption with External Reference at 500ksps
- 10µA in Shutdown Mode
- Multi-Industry Standard Serial Interface and Small Package Reduce Size
- SPI/QSPI™/MICROWIRE®/DSP-Compatible Serial Interface
- 3mm x 3mm Tiny 12-Pin TDFN Package
MAX5805 Ultra-Small, Single-Channel, 8-/10-/12-Bit Buffered Output Voltage DACs with Internal Reference and I2C Interface
The MAX5803/MAX5804/MAX5805 single-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-...
- Single High-Accuracy DAC Channel
- 12-Bit Accuracy Without Adjustments
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 6.3µs Settling Time
- Output Directly Drives 2kΩ Loads
- Small, 10-Pin, 2mm x 3mm TDFN and 3mm x 5mm µMAX Packages
- Wide 2.7V to 5.5V Supply Range
- Flexible 1.8V to 5.5V VDDIO
- Fast 400kHz, I2C-Compatible, 2-Wire Serial Interface with Readback
- Power-On-Reset to Zero-Scale DAC Output
- User-Configurable Asynchronous I/O Functions: Active-Low CLR, Active-Low LDAC, Active-Low GATE
- Three Software-Selectable Power-Down Output Impedances: 1kΩ, 100kΩ, or High Impedance
- Low 155µA DAC Supply Current at 3V
MAX5550 Dual, 10-Bit, Programmable, 30mA High-Output-Current DAC
The MAX5550 dual, 10-bit, digital-to-analog converter (DAC) features high-output-current capabil...
- Pin-Selectable I²C- or SPI-Compatible Interface
- Guaranteed Low Output Leakage Current in Shutdown (±1µA max)
- Guaranteed Monotonic over Extended Temperature Range
- Dual Outputs for Balanced Systems
- Current Outputs Source Up to 30mA per DAC
- Parallelable Outputs for 60mA Applications
- Output Stable with RF Filters
- Internal or External Reference Capability
- Digital Output (DOUT) Available for Daisy Chaining in SPI Mode
- +2.7V to +5.25V Single-Supply Operation
- 16-Pin (3mm x 3mm) Thin QFN Package
- Programmable Output Current Range Set by Software and Adjustment Resistor
MAX5825 Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Eight High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
- Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX5715 Ultra-Small, Quad-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and SPI Interface
The MAX5713/MAX5714/MAX5715 4-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Four High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 5mm x 4.4mm 14-Pin TSSOP or Ultra-Small 1.6mm x 2.2mm 12-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- 50MHz 3-Wire SPI/QSPI/MICROWIRE/DSP-Compatible Serial Interface with Active-Low RDY Output
- Power-On-Reset to Zero-Scale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX5216 14-/16-Bit, Low-Power, Buffered Output, Rail-to-Rail DACs with SPI Interface
The MAX5214/MAX5216 are pin-compatible, 14-bit and 16-bit digital-to-analog converters (DACs). T...
- Low-Power Consumption (80µA max)
- 14-/16-Bit Resolution in a 3mm x 5mm, 8-Pin µMAX Package
- Relative Accuracy
- ±0.40 LSB INL (MAX5214, 14-Bit typ, ±1 LSB max)
- ±1.2 LSB INL (MAX5216, 16-Bit typ, ±4 LSB max)
- Guaranteed Monotonic Over All Operating Ranges
- Low Gain and Offset Error
- Wide 2.7V to 5.5V Supply Range
- Rail-to-Rail Buffered Output Operation
- Safe Power-On Reset (POR) to Zero DAC Output
- Fast 50MHz, 3-Wire, SPI/QSPI/MICROWIRE-Compatible Serial Interface
- Schmitt-Trigger Inputs for Direct Optocoupler Interface
- Asynchronous Active-Low CLR Clears DAC Output to Code 0
- High Reference Input Resistance for Power Reduction
- Buffered Voltage Output Directly Drives 10kΩ Loads
MAX5854 Dual, 10-Bit, 165Msps, Current-Output DAC
The MAX5854 dual, 10-bit, 165Msps digital-to-analog converter (DAC) provides superior dynamic pe...
- 10-Bit, 165Msps Dual DAC
- Low Power
- 190mW with IFS = 20mA at fCLK = 165MHz
- 2.7V to 3.6V Single Supply
- Full Output Swing and Dynamic Performance at 2.7V Supply
- Superior Dynamic Performance
- 73dBc SFDR at fOUT = 40MHz
- UMTS ACLR = 65.5dB at fOUT = 30.7MHz
- Programmable Channel Gain Matching
- Integrated 1.24V Low-Noise Bandgap Reference
- Single-Resistor Gain Control
- Interleaved Data Mode
- Single-Ended and Differential Clock Input Modes
- Miniature 40-Pin TQFN Package, 6mm x 6mm
- EV Kit Available—MAX5854 EV Kit
MAX22000 Industrial Configurable Analog I/O
The MAX22000 is an industrial-grade configurable analog input/output device that can be configur...
- Accurate
- AOVM Mode:
- 0.02%FSR Accuracy, Room Temp
- 0.1%FSR Accuracy, ±50°C Temp Variation
- 5ppm/°C Internal Reference
- AOVM Mode:
- Flexible
- 6 Analog Inputs/1 Analog Output Using Software Configurable Voltage and Current
- Two Auxiliary ADC Inputs for Cold Junction Measurements
- RTD Input Mode in 2, 3, or 4-Wire Configurations
- Thermocouple Input Mode
- ±12.5V Input/Output Voltage Range
- ±25mA or ±2.5mA Output Current Range
- ±25V, ±2.5V, ±500mV, ±250mV, and ±125mV PGA Input Voltage Ranges
- +24V Field Supply for Current Loop
- Optional External Reference for ADC and/or DAC
- Six GPIOs
- 20MHz SPI Interface
- Robust
- ±36V Protection on All Analog I/O Ports
- Overcurrrent Protection
- Thermal Shutdown
- Undervoltage Interrupt on All High Voltage Supplies
- CRC Detection
- Open Detection on All Analog Inputs
- 2kV HBM Protection on All Pins
- -40°C to +125°C Operating Temperature Range
- Small 9mm x 9.5mm 64-Pin LGA Package
MAX5861 DOCSIS 3.1 High-Density SCQAM and OFDM Downstream Cable Modulator
The MAX5861 is an integrated, high-density, SCQAM and OFDM downstream cable modulator, digital u...
- High-Density Cable Downstream Modulator
- Combine Up to Six 192MHz Blocks of 32 x 6MHz SCQAM Channels and DOCSIS 3.1 OFDM Channels
- Integrated 14-Bit 4.9152Gsps RF-DAC
- Highly Flexible and Configurable
- ITU-T J.83 Annex A, B, and C SCQAM Channels
- IFFT Processing D3.1 OFDM Channels
- LVDS or SSTL 1.2/1.5 DDR Data Ports
- One 10-Bit SCQAM Port with 160-Channel Capacity
- Two 9-Bit OFDM Ports with 6 OFDM-Channel Capacity
- Channel Bandwidths:
- 1MHz to 8MHz SCQAM
- 24MHz/48MHz/96MHz/192MHz OFDM
- 192MHz IFFT Bypass Mode
- Full SCQAM Agility within 192MHz Block
- Block Agility within 1218MHz Output Bandwidth
- Additional Features Ease RF Design
- Programmable Digital Predistortion
- High Output Power: 9dBm (Peak CW)
- Low-Power, Compact Solution
- 5.9W with 128 SCQAMs + 2 OFDM Channels
- Operating Temperature Range TA = -40°C to TJ = +110°C
- 12mm x 18mm, 308-Ball LFBGA
MAX5824 Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Eight High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
- Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX5823 Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analo...
- Eight High-Accuracy DAC Channels
- 12-Bit Accuracy Without Adjustment
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Independent Mode Settings for Each DAC
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 4.5µs Settling Time
- Outputs Directly Drive 2kΩ Loads
- Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
- Wide 2.7V to 5.5V Supply Range
- Separate 1.8V to 5.5V VDDIO Power-Supply Input
- Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
- Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
- Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
- Three Software-Selectable Power-Down Output Impedances
- 1kΩ, 100kΩ, or High Impedance
MAX11301 PIXI, 20-Port Programmable Mixed-Signal I/O with 12-Bit ADC, 12-Bit DAC, Analog Switches, and GPIO
The MAX11301 integrates a PIXIâ„¢, 12-bit, multichannel, analog-to-digital converter (ADC) and a 1...
- 20 Configurable Mixed-Signal Ports Maximize Design Flexibility Across Platforms
- Up to 20 12-Bit ADC Inputs
- Single-Ended, Differential, or Pseudo-Differential
- Range Options: 0 to 2.5V, ±5V, 0 to +10V, -10V to 0V
- Programmable Sample Averaging Per ADC Port
- Unique Voltage Reference for Each ADC PIXI Port
- Up to 20 12-Bit DAC Outputs
- Range Options: ±5V, 0 to +10V, -10V to 0V
- 25mA Current Drive Capability with Overcurrent Protection
- Up to 20 General-Purpose Digital I/Os
- 0 to +5V GPI Input Range
- 0 to +2.5V GPI Programmable Threshold Range
- 0 to +10V GPO Programmable Output Range
- Logic-Level Shifting Between Any Two Pins
- 60Ω Analog Switch Between Adjacent PIXI Ports
- Internal/External Temperature Sensors, ±1°C Accuracy
- Up to 20 12-Bit ADC Inputs
- Adapts to Specific Application Requirements and Allows for Easy Reconfiguration as System Needs Change
- Configurability of Functions Enables Optimized PCB Layout
- Reduces BOM Cost with Fewer Components in Small Footprint
- 36mm² 40-Pin TQFN
- 49mm² 48-Pin TQFP
MAX5717 16- and 20-Bit Voltage DACs
The MAX5717 and MAX5719 are serial-input, unbuffered 16 and 20-bit voltage-output unipolar digit...
- 16 and 20-Bit resolution
- 1LSB INL (Max, 16-bit)
- ±0.5 LSB DNL (Max, 16-Bit)
- 750ns Settling Time (typ)
- 0.05 nV-sec Glitch Energy
- 6nv/√Hz Output Noise Density
- Integrated ±0.025% (max) Bipolar Setting Resistors
- 4.5V to 5.5V Supply Range
- 4.0V to VDD Reference Input Range
- Safe Power-Up Reset-to-Zero-Scale DAC Output (Unipolar)
- 50MHz 3-Wire SPI Interface
- -40°C to +105°C Operating Temperature Range.
- SO-14 Package
MAX5719 16- and 20-Bit Voltage DACs
The MAX5717 and MAX5719 are serial-input, unbuffered 16 and 20-bit voltage-output unipolar digit...
- 16 and 20-Bit resolution
- 1LSB INL (Max, 16-bit)
- ±0.5 LSB DNL (Max, 16-Bit)
- 750ns Settling Time (typ)
- 0.05 nV-sec Glitch Energy
- 6nv/√Hz Output Noise Density
- Integrated ±0.025% (max) Bipolar Setting Resistors
- 4.5V to 5.5V Supply Range
- 4.0V to VDD Reference Input Range
- Safe Power-Up Reset-to-Zero-Scale DAC Output (Unipolar)
- 50MHz 3-Wire SPI Interface
- -40°C to +105°C Operating Temperature Range.
- SO-14 Package
MAX5850 14-Bit 3.072Gsps RF DAC
The MAX5850 is a 14-Bit, 3.072Gsps digital-to-analog converter (DAC) and can directly synthesize...
- Simplifies RF Design and Enables New Communication Architectures
- Enables Multi-Band RF Modulation
- Direct RF Synthesis of 1.5GHz Bandwidth
- 3.072Gsps DAC Output Update Rate
- High-Performance 14-Bit RF DAC Core
- Highly Flexible and Configurable
- 6-Lane JESD204B Input Data Interface
- 10.24Gbps Serial Data Rate
- Subclass-0 Compliant
- Divided Reference Clock Output
- SPI Interface for Device Configuration
MAX5882 14-Bit, 4.6Gsps Cable Downstream Direct RF Synthesis DAC
The MAX5882 14-bit, 4.6Gsps digital-to-analog converter (DAC) is designed for direct RF synthesi...
- 4.6Gsps Output Update Rate
- Direct RF Synthesis from 47MHz to 1003MHz
- No Aliasing of HD3 into Cable Band
- Industry-Leading DOCSIS 3.0 Performance Noise Floor
- -70dBc at fOUT = 900MHz, 8 Channel (256 QAM)
- -66dBc at fOUT = 900MHz, 16 Channel (256 QAM)
- -62dBc at fOUT = 900MHz, 32 Channel (256 QAM)
- -57dBc at fOUT = 500MHz, 128 Channel (256 QAM)
- High Output Power 9dBm (CW)
- Enables Low Solution Power
- 4:1 Multiplexed LVDS Inputs
- Up to 1150Mwps Each Port
- Double Data Rate (DDR) Mode
- On-Chip DLL for Input Data Synchronization
- Parity Error Flag
- Internal 50Ω Differential Output Termination
- Input Register Scan Mode
- Compact 17mm × 17mm, 256 CSBGA Package
- Evaluation Kit Available (Order MAX5882EVKIT+)
DS4424 Two-/Four-Channel, I²C, 7-Bit Sink/Source Current DAC
The DS4422 and DS4424 contain two or four I²C programmable current DACs that are each capable of...
- Two (DS4422) or Four (DS4424) Current DACs
- Full-Scale Current 50µA to 200µA
- Full-Scale Range for Each DAC Determined by External Resistors
- 127 Settings Each for Sink and Source Modes
- I²C-Compatible Serial Interface
- Two Address Input Pins Allow Four Devices on Same I²C Bus
- Low Cost
- Small Package (14-Pin, 3mm x 3mm TDFN)
- -40°C to +85°C Temperature Range
- 2.7V to 5.5V Operating Range
DS4422 Two-/Four-Channel, I²C, 7-Bit Sink/Source Current DAC
The DS4422 and DS4424 contain two or four I²C programmable current DACs that are each capable of...
- Two (DS4422) or Four (DS4424) Current DACs
- Full-Scale Current 50µA to 200µA
- Full-Scale Range for Each DAC Determined by External Resistors
- 127 Settings Each for Sink and Source Modes
- I²C-Compatible Serial Interface
- Two Address Input Pins Allow Four Devices on Same I²C Bus
- Low Cost
- Small Package (14-Pin, 3mm x 3mm TDFN)
- -40°C to +85°C Temperature Range
- 2.7V to 5.5V Operating Range
MAX11262 14-Bit, 500ksps, +5V Unipolar Input, SAR ADC, in Tiny 10-Pin µMAX
The MAX11262 is a 14-bit, 500ksps, +5V unipolar pseudo-differential input SAR ADC offering excel...
- High DC/AC Accuracy Improves Measurement Quality
- 14-Bit Resolution with No Missing Codes
- 500ksps Throughput Rates without Pipeline Delay/Latency
- 85.4dB SNR and -102dB THD at 10kHz
- 0.1 LSBRMSTransition Noise
- ±0.12 LSB DNL (typ) and ±0.2 LSB INL (typ)
- Wide Supply Range and Low Power Simplify Power-Supply Design
- 5V Analog Supply
- 2.3V to 5V Digital Supply
- 23.5mW Power Consumption at 500ksps
- 10µA in Shutdown Mode
- Multi-Industry Standard Serial Interface and Small Package Reduce Size
- SPI/QSPI™/MICROWIRE®/DSP-Compatible Serial Interface
- 3mm x 5mm, Tiny 10-Pin µMAX Package
MAX5712 Low-Power, 12-Bit, Rail-to-Rail Voltage-Output Serial DAC in SOT23
The MAX5712 is a small footprint, low-power, 12-bit digital-to-analog converter (DAC) that opera...
- Wide -40°C to +125°C Operating Temperature Range
- Low 85µA Supply Current
- Ultra Low 0.3µA Power-Down Supply Current
- Single +2.7V to +5.5V Supply Voltage
- Fast 20MHz 3-Wire SPI/QSPI/MICROWIRE and DSP-Compatible Serial Interface
- Schmitt-Triggered Inputs for Direct Interfacing to Optocouplers
- Rail-to-Rail Output Buffer
- Tiny 6-Pin SOT23 Package
- Power-On Reset to 0V
- Three Software-Selectable Power-Down Output Impedances (100kΩ, 1kΩ, Hi-Z)
MAX11154 18-Bit, 500ksps, 0 to 5V SAR ADC with Internal Reference in TDFN
The MAX11154 18-bit, 500ksps, SAR ADC offers excellent AC and DC performance with unipolar input...
- High DC/AC Accuracy Improves Measurement Quality
- 18-Bit Resolution with No Missing Codes
- 500ksps Throughput Rates without Pipeline Delay/Latency
- 93.8dB SNR and -105dB THD at 10kHz
- 1.7 LSBRMS Transition Noise
- ±0.6 LSB DNL (typ) and ±2 LSB INL (typ)
- Highly Integrated ADC Saves Cost and Space
- ±7ppm/°C Internal Reference
- Internal Reference Buffer
- Wide Supply Range and Low Power Simplify Power-Supply Design
- 5V Analog Supply
- 2.3V to 5V Digital Supply
- 23.6mW Power Consumption with External Reference at 500ksps
- 10µA in Shutdown Mode
- Multi-Industry Standard Serial Interface and Small Package Reduce Size
- SPI/QSPI™/MICROWIRE®/DSP-Compatible Serial Interface
- 3mm x 3mm Tiny 12-Pin TDFN Package
MAX5805 Ultra-Small, Single-Channel, 8-/10-/12-Bit Buffered Output Voltage DACs with Internal Reference and I2C Interface
The MAX5803/MAX5804/MAX5805 single-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-...
- Single High-Accuracy DAC Channel
- 12-Bit Accuracy Without Adjustments
- ±1 LSB INL Buffered Voltage Output
- Guaranteed Monotonic Over All Operating Conditions
- Three Precision Selectable Internal References
- 2.048V, 2.500V, or 4.096V
- Internal Output Buffer
- Rail-to-Rail Operation with External Reference
- 6.3µs Settling Time
- Output Directly Drives 2kΩ Loads
- Small, 10-Pin, 2mm x 3mm TDFN and 3mm x 5mm µMAX Packages
- Wide 2.7V to 5.5V Supply Range
- Flexible 1.8V to 5.5V VDDIO
- Fast 400kHz, I2C-Compatible, 2-Wire Serial Interface with Readback
- Power-On-Reset to Zero-Scale DAC Output
- User-Configurable Asynchronous I/O Functions: Active-Low CLR, Active-Low LDAC, Active-Low GATE
- Three Software-Selectable Power-Down Output Impedances: 1kΩ, 100kΩ, or High Impedance
- Low 155µA DAC Supply Current at 3V
Reference Designs
MAXREFDES32#: 2-Channel Analog Input/Analog Output with Flyback DC-DC
MAXREFDES32# subsystem reference design is a high-speed, high-accuracy, 16-bit, 2-channel simult...
MAXREFDES71#: 2-Channel Analog Input/Analog Output with Transformer Driven Power
MAXREFDES71# subsystem reference design is a high-speed, high-accuracy, 16-bit, 2-channel simult...
Alameda (MAXREFDES24#): 4-Channel Analog Output
The Alameda (MAXREFDES24#) subsystem reference design is an isolated, 4-channel high-accuracy an...
Monterey (MAXREFDES15#): Ultra-Low Power, High-Accuracy 4-20mA 2-Wire Current-Loop Sensor
Monterey features ultra-low power, 4–20mA current-loop transmitter, RTD PT1000 sensor, high prec...
Carmel (MAXREFDES18#): High Accuracy Analog Current/Voltage Output
The Carmel (MAXREFDES18#) subsystem reference design is an isolated, high-accuracy analog curren...
3V DACs Used in ±10V Applications
This application note discribes using a 3V DAC, then level shifting and amplifying the output to...
MAXREFDES32#: 2-Channel Analog Input/Analog Output with Flyback DC-DC
MAXREFDES32# subsystem reference design is a high-speed, high-accuracy, 16-bit, 2-channel simult...
MAXREFDES71#: 2-Channel Analog Input/Analog Output with Transformer Driven Power
MAXREFDES71# subsystem reference design is a high-speed, high-accuracy, 16-bit, 2-channel simult...
Alameda (MAXREFDES24#): 4-Channel Analog Output
The Alameda (MAXREFDES24#) subsystem reference design is an isolated, 4-channel high-accuracy an...
Monterey (MAXREFDES15#): Ultra-Low Power, High-Accuracy 4-20mA 2-Wire Current-Loop Sensor
Monterey features ultra-low power, 4–20mA current-loop transmitter, RTD PT1000 sensor, high prec...
Carmel (MAXREFDES18#): High Accuracy Analog Current/Voltage Output
The Carmel (MAXREFDES18#) subsystem reference design is an isolated, high-accuracy analog curren...
3V DACs Used in ±10V Applications
This application note discribes using a 3V DAC, then level shifting and amplifying the output to...
Share
Request a Quote