DS1847

Dual Temperature-Controlled NV Variable Resistor


Please check latest availability status for a specific part variant.

Description

The DS1847 Dual Temperature-Controlled Nonvolatile (NV) Variable Resistor consists of two 256- position linear, variable resistors. The DS1847-050 consists of one 10kΩ and one 50kΩ, while the DS1847-010 consists of two 10kΩ resistors; both incorporate a direct-to-digital temperature sensor. The device provides an ideal method for setting and temperature-compensating bias voltages and currents in control applications using a minimum of circuitry.

The variable resistors settings are stored in EEPROM memory and can be accessed over the industry standard 2-wire serial bus. The value of each variable resistor is determined by a temperature-addressed look-up table, which can assign a unique value to each resistor for every 2°C increment over the -40°C to +95°C range. The output of the digital temperature sensor is also available as a 13-bit, 2's complement value over the serial bus. The interface I/O pins consist of SDA and SCL.
DS1847: Pin Assignment DS1847: Pin Assignment Enlarge+

Key Features

  • Two linear taper, temperature-controlled variable resistors
  • DS1847-050
    • One 50kΩ, 256 position
    • One 10kΩ, 256 position
  • DS1847-010
    • Two 10kΩ, 256 position
  • Resistor settings changeable every 2°C
  • Access to temperature data and device control via a 2-wire interface
  • Operates from 3V or 5V supplies
  • Packaging: 14-pin TSSOP, 16-ball CSBGA
  • Operating temperature: -40°C to +95°C
  • Programming temperature: 0°C to +70°C

See parametric specs for Digital Potentiometers (118)


Part NumberTaperPOTsControl InterfaceWiper MemoryStepsREND-TO-END
(kΩ)
Res. Tol.
(%)
Temp. Coeff.
(ppm/°C)
ICC @5V
(µA)
Package/PinsBudgetary
Price
typmaxSee Notes
DS1847 Linear22-Wire AddressableNon-Volatile25610+50208501000
CSBGA/16
TSSOP/14
$2.54 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Product Reliability Reports: DS1847.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources