CMOS, 1.3µs, 8-Bit ADC with Voltage Reference and Track/Hold
DescriptionThe MAX150/MX7820 is a high speed, microprocessor compatible, 8 bit analog to digital converter which uses a half-flash technique to achieve a conversion time of 1.34 μs. The converter has a 0V to +5V analog input range and uses a single +5V supply.
A built-in track-and-hold function is included, eliminating the need for an external track-and-hold for input slew rates up to 100mV/μs. The MAX150 also provides an on-chip 2.5 V reference output, making it a complete analog to digital converter.
The A/Ds easily interface with microprocessors by appearing as a memory location or I/O port without the need for external interfacing logic. The data outputs use latched, three-state buffer circuitry to allow direct connection to a microprocessor data bus or system input port. An over-flow output is also provided for cascading devices to achieve higher resolution.
The MX7820 is pin compatible with Analog Devices' AD7820. The MAX150 is also compatible with the MX7820 but also includes an internal 2.5V reference.
- Fast Conversion Time: 1.34μs Max.
- Built-in Track-and-Hold Function
- No Adjustment Required
- No External Clock
- Single +5V Supply
- Easy Interface To Microprocessors
- Internal 2.5V Reference (MAX150 only)
- Audio Systems
- Digital Signal Processing
- High Speed Data Acquisition
- High Speed Servo Loops
|Input Channels||Conv. Rate|
|ADC Architecture||Data Bus||Diff/S.E. Input||Internal VREF|
|Device||Fab Process||Technology||Sample size||Rejects||FIT at 25°C||FIT at 55°C||Material Composition|