12-Bit, 20Msps, +3.3V, Low-Power ADC with Internal Reference

Please check latest availability status for a specific part variant.


The MAX1422 3.3V, 12-bit analog-to-digital converter (ADC) features a fully differential input, pipelined, 12- stage ADC architecture with wideband track-and-hold (T/H) and digital error correction incorporating a fully-differential signal path. The MAX1422 is optimized for lowpower, high dynamic performance applications in imaging and digital communications. The converter operates from a single 3.3V supply, consuming only 137mW while delivering a 67dB (typ) signal-to-noise ratio (SNR) at a 5MHz input frequency and a 20Msps sampling frequency. The fully-differential input stage has a small signal -3dB bandwidth of 400MHz and may be operated with single-ended inputs.

An internal 2.048V precision bandgap reference sets the ADCs full-scale range. A flexible reference structure accommodates an internally or externally applied buffered or unbuffered reference for applications requiring increased accuracy or a different input voltage range.

In addition to low operating power, the MAX1422 features two power-down modes, a reference power-down, and a shutdown mode. In reference power-down, the internal bandgap reference is deactivated, resulting in a 2mA (typ) supply current reduction. For idle periods, a full shutdown mode is available to maximize power savings.

The MAX1422 provides parallel, offset binary, CMOS-compatible three-state outputs.

The MAX1422 is available in a 7mm x 7mm x 1.4mm, 48-pin TQFP package and is specified over the commercial (0°C to +70°C) and extended industrial (-40°C to +85°C) temperature ranges.

Pin-compatible higher-speed versions of the MAX1422 are also available. Please refer to the MAX1421 data sheet for 40Msps and the MAX1420 data sheet for 60Msps.
MAX1422: Functional Diagram MAX1422: Functional Diagram Enlarge+

Key Features

  • Single 3.3V Power Supply
  • 67dB SNR at fIN = 5MHz
  • Internal 2.048V Precision Bandgap Reference
  • Differential Wideband Input T/H Amplifier
  • Power-Down Modes
    • 130mW (Reference Shutdown Mode)
    • 10µW (Shutdown Mode)
  • Space-Saving 48-Pin TQFP Package


  • CCD Pixel Processing
  • Data Acquisition
  • IF and Baseband Digitization
  • Medical Ultrasound Imaging
  • Radar

See parametric specs for High-Speed ADCs (> 5Msps) (49)

Part NumberInput ChannelsResolution
Sample Rate
AC Specs
Full Pwr. BW
Data Bus InterfacePackage/PinsBudgetary
max@ fINminminmintypSee Notes
MAX1422 11220157410.56567-721215042µP/12
$6.98 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Request Reliability Report for: MAX1422 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources