MAX1337

5.5Msps, 2-Channel, 3V, True-Differential, 8-Bit ADC


Please check latest availability status for a specific part variant.

Description

The MAX1337 2-channel, serial-output, 8-bit, analog-to-digital converter (ADC) features two true-differential analog inputs and offers outstanding noise immunity and dynamic performance. This device easily interfaces with SPI™/QSPI™/MICROWIRE™ and standard digital signal processors (DSPs).

The MAX1337 operates from a single supply of +2.7V to +3.6V with sampling rates up to 5.5Msps. This device features a partial power-down mode and a full power-down mode that reduces the supply current to 3.3mA and 0.2µA, respectively. Also featured is a separate power supply input (DVDD) that allows direct interfacing to +2.7V to +3.6V digital logic. The fast conversion speed, low power dissipation, excellent AC performance, and DC accuracy (±0.1 LSB INL) make the MAX1337 ideal for industrial process control, motor control, and base-station applications.

The MAX1337 is available in a space-saving (3mm x 3mm), 16-pin, TQFN package and operates over the extended (-40°C to +85°C) temperature range.

Key Features

  • 5.5Msps Sampling Rate (+3V, MAX1337)
  • Separate Logic Supply: +2.7V to +3.6V
  • Two True-Differential Analog Input Channels
  • Bipolar/Unipolar Selection Input
  • Only 40mW (typ) Power Consumption
  • Only 2µA (max) Shutdown Current
  • High-Speed, SPI-Compatible, 3-Wire Serial Interface
  • 6.6MHz Full-Linear Bandwidth
  • 49.5dB SINAD at 525kHz Input Frequency
  • No Pipeline Delays
  • Space-Saving (3mm x 3mm), 16-Pin, TQFN Package
  • Applications/Uses

    • Base Stations
    • Bill Validation
    • Data Acquisition
    • High-Speed Modems
    • Industrial Process Control
    • Motor Control
    • Optical Sensors
    Request Reliability Report for: MAX1337 
    Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources