Evaluation Kit for the MAX1294 and MAX1295

Please check latest availability status for a specific part variant.


The MAX1294 evaluation kit (EV kit) is assembled with a MAX1294 and the basic components necessary to evaluate the 12-bit analog-to-digital converter (ADC). Connectors for power supplies, analog inputs, and digital signals simplify connections to the device. A 40-pin header allows the user to connect a logic analyzer using a ribbon cable or the conventional miniclips. BNC connectors with 50 ohms termination provide easy connection between function generators and the analog inputs. The board layout is designed to yield 12-bit accuracy with low noise when sampling at the maximum rate of 420ksps.

The MAX1294 EV kit may also be used to evaluate the MAX1295. Request a free sample of the MAX1295BCEI when ordering the MAX1294 EV kit.

Key Features

  • 12-Bit Analog-to-Digital Conversion
  • Six Input Channels
  • 12-Bit-Wide Digital Interface
  • Internal Track and Hold
  • 420kHz Sampling Rate
  • Internal 2.5V Reference
  • Internal Clock
  • Low-Power Standby Mode
  • Fully Assembled Surface-Mount Board


  • Data Acquisition
  • Digital Still Cameras
  • Energy Management
  • Industrial Control Systems
  • Patient Monitoring
  • Touch Screens
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources