Top

3-Pin Silicon Oscillator

Low-Cost, 3-Pin Silicon Oscillator Resistant to EMI, Vibration, and Humidity; Replaces Crystals and Ceramic Resonators

Product Details

Key Features

Applications/Uses

Simplified Block Diagram

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .

Key Features

  • 2.7V to 5.5V Operation
  • Factory-Trimmed Oscillator (600kHz to 9.99MHz)
  • No External Components Required
  • ±10mA Output Drive Current
  • 2% Initial Accuracy
  • ±50ppm/°C Temp Drift
  • Fast Startup Time: 5µs
  • 40% to 60% Maximum Duty Cycle
  • 5ns Output Rise and Fall Time-Low EMI
  • Very Low EMI Susceptibility-No High-Impedance Nodes
  • Very Low Jitter: 160psP-P at 8MHz
  • Tiny Surface-Mount Package (SC70)
  • -40°C to +125°C Temperature Range

Applications/Uses

  • Appliances and Controls
  • Hand-Held Products
  • Microcontroller Systems
  • Portable Equipment
  • White Goods

Description

The MAX7375 is a silicon oscillator, intended as a low-cost improvement replacing ceramic resonators, crystals, and crystal oscillator modules used as the clock source for microcontrollers and UARTs in 3V, 3.3V, and 5V applications.

The MAX7375 is a fully integrated oscillator, supplied at specific factory-trimmed frequencies with a rail-to-rail 50% duty cycle square-wave output. The oscillator frequency is generated directly without the use of a phase-locked loop (PLL). No additional components are used to set or adjust the frequency.

Unlike typical crystal and ceramic resonator oscillator circuits, the MAX7375 is highly resistant to vibration and EMI. The high output drive current and absence of high-impedance nodes also makes the oscillator less susceptible to dirty or humid operating conditions. With a wide operating temperature range, the oscillator is a good choice for demanding home appliance environments.

Available in 3-pin space-saving SC70 package, the MAX7375 is offered in standard and nonstandard factory-set frequencies ranging from 600kHz to 9.99MHz. See the MAX7381 data sheet for frequencies ≥ 10MHz. The MAX7375’s standard operating temperature range is -40°C to +125°C. See the Applications Information section, in the full data sheet, for extended operating temperature range.

Simplified Block Diagram

MAX7375: Typical Application Circuit MAX7375: Typical Application Circuit Zoom icon

Support & Training

Search our knowledge base for answers to your technical questions.

Filtered Search

Our dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .