Product Details
These clock oscillators are crystal based and use a fundamental crystal with PLL technology to provide the final output frequencies. Each device is offered with LVDS or LVPECL output types. The output enable pin is active-high logic.
These clock oscillators have very low phase jitter and phase noise. Typical phase jitter is < 0.7psRMS from 12kHz to 20MHz. The devices are designed to operate with a 3.3V ±5% supply voltage, and are available in a 5.0mm x 3.2mm x 1.49mm, 10-pin LCCC surface-mount ceramic package.
Key Features
- < 0.7psRMS from 12kHz to 20MHz Jitter
- LVDS or LVPECL Output Types
- 3.3V Operating Voltage
- 5.0mm x 3.2mm x 1.49mm, 10-Pin LCCC Ceramic Package
- -40°C to +85°C Operating Temperature Range
- Lead-Free/RoHS Compliant
Applications/Uses
- 10GbE
- BPON
- Ethernet
- Fibre Channel
- GPON
- Host Bus Adapters
- InfiniBand™
- Routers
- SONET/SDH
- Switches
Technical Docs
Data Sheet | DS4-XO Series Clock Oscillators | Jul 01, 2008 |
Click any title below to view the detail page where available.
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal
Parameters
Key Features
- < 0.7psRMS from 12kHz to 20MHz Jitter
- LVDS or LVPECL Output Types
- 3.3V Operating Voltage
- 5.0mm x 3.2mm x 1.49mm, 10-Pin LCCC Ceramic Package
- -40°C to +85°C Operating Temperature Range
- Lead-Free/RoHS Compliant
Applications/Uses
- 10GbE
- BPON
- Ethernet
- Fibre Channel
- GPON
- Host Bus Adapters
- InfiniBand™
- Routers
- SONET/SDH
- Switches
Description
These clock oscillators are crystal based and use a fundamental crystal with PLL technology to provide the final output frequencies. Each device is offered with LVDS or LVPECL output types. The output enable pin is active-high logic.
These clock oscillators have very low phase jitter and phase noise. Typical phase jitter is < 0.7psRMS from 12kHz to 20MHz. The devices are designed to operate with a 3.3V ±5% supply voltage, and are available in a 5.0mm x 3.2mm x 1.49mm, 10-pin LCCC surface-mount ceramic package.
Technical Docs
Data Sheet | DS4-XO Series Clock Oscillators | Jul 01, 2008 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal