100MHz HCSL Clock Oscillator

Only Oscillator Module That Provides a Direct 100MHz HCSL Output

Please check latest availability status for a specific part variant.


The DS4100H is a low-jitter 100MHz clock oscillator with a high-speed current steering logic (HCSL) output. It combines an AT-cut crystal, an oscillator, and a low-noise phase-locked loop (PLL) in a 5mm by 3.2mm ceramic package. Typical phase jitter is 0.9psRMS from 12kHz to 20MHz. The device operates from a single +3.3V supply.
DS4100H: Typical Operating Circuit DS4100H: Typical Operating Circuit Enlarge+

Key Features

  • 100MHz Output Frequency
  • 3.3V ±5% Operating Voltage
  • HCSL Output
  • Phase Jitter (RMS): 0.9ps Typical
  • ±39ppm Frequency Stability Over Voltage, Temperature, 10 Years of Aging
  • Output-Enable (OE) Control Input
  • 5mm x 3.2mm x 1.49mm Ceramic Package (LCCC)
  • Pb Free/RoHS Compliant


  • PCI Express®
Product Reliability Reports: DS4100H.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources