DS1094L

Multiphase Spread-Spectrum EconOscillator

Industry's Widest Temperature Range, Multiphase Oscillator


Please check latest availability status for a specific part variant.

Description

The DS1094L is a silicon oscillator that generates four multiphase, spread-spectrum, square-wave outputs. Frequencies between 2MHz and 31.25kHz can be output in either two, three, or four-phase mode. The internal master oscillator can be dithered by either 0, 2, 4, or 8%; to reduce the amount of peak spectral energy at the fundamental and harmonic clock frequencies. This significantly reduces the amount of electromagnetic interference (EMI) radiation that is generated at the system level. The DS1094L is ideally suited as a clock generator for switched-mode power supplies. The outputs generated by the DS1094L are used by DC-DC circuitry to efficiently shift voltages either up or down. The DS1094L can be programmed using the I²C-compatible, 2-wire serial interface to select the output frequency, number of clock phases, and dither rate, or optionally it can be shipped from the factory custom programmed.
DS1094L: Typical Operating Circuit DS1094L: Typical Operating Circuit Enlarge+

Key Features

  • EconOscillator with Two, Three, or Four Phase Outputs
  • Ideally Suited as the Clock Generator for Switch Mode Power Supplies
  • Output Frequencies Programmable from 2MHz to 31.25kHz
  • Dithered Output Significantly Reduces EMI Emissions
  • No External Timing Components Required
  • Nonvolatile (NV) Configuration Settings
  • User-Programmable—Factory Programmed Options Available
  • Operating Temperature Range: -40°C to +85°C

Applications/Uses

  • Printers
  • Servers
  • Switch-Mode Power Supplies
Part NumberfOUT
(MHz)
fOUT
(kHz)
User Prog. fOUTSpread SpectrumVCC
(V)
Reset OutOper. Temp.
(°C)
Package/PinsBudgetary
Price
maxminSee Notes
DS1094L 231.25I2CYes3.0 to 3.6No-40 to +85
UMAX/8
$2.15 @1k
See All Silicon Oscillators (17)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

CAD Symbols and Footprints

  • DS1094LU-350+
  • DS1094LU-350+T
  • DS1094LU-42M+
  • DS1094LU-42M+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources