/
/
/
Clock Generation and Distribution 
/
Top
/content/maximintegrated/en/products/analog/clock-generation-distribution/clock-synthesis-generation 
5MHz to 35MHz for Crystal-Clock Reference 5MHz to 50MHz for a Driver Clock Reference One Fractional-N PLL with Buffered Output 4MHz to 200MHz Output Frequency Range Low RMS Jitter PLL (< 13ps) at 197 MHz Integrated VCXO with ±200ppm Tuning Range Available in 14-Pin TSSOP and 20-Pin TQFN Packages +3.3V Supply -40°C to +85°C Temperature Range Single 3.3V Supply Controlled 50Ω Microstrip Traces On-Board Adjustable Charge Pump Current Fully Assembled and Tested 5MHz to 35MHz for Crystal-Clock Reference 5MHz to 50MHz for a Driver Clock Reference One Fractional-N PLL with Buffered Output 4MHz to 200MHz Output Frequency Range Low RMS Jitter PLL (< 13ps) at 197 MHz Integrated VCXO with ±200ppm Tuning Range Available in 14-Pin TSSOP and 20-Pin TQFN Packages +3.3V Supply -40°C to +85°C Temperature Range Single 3.3V Supply Controlled 50Ω Microstrip Traces On-Board Adjustable Charge Pump Current Fully Assembled and Tested 
Our clock generator ICs covering a wide variety of applications. Maxim's clock ICs achieve industry-leading jitter and meet all wireline networking standards.
Our clock multiplier ICs offer a precise, economical and reliable timing solution for reducing electro-magnetic interference (EMI) radiation, and to ensure EMI standards compliance. Our pin-programmable clock multipliers generate a wide range of clock frequencies (8MHz to 134MHz) from a single external crystal. Dithered spread-spectrum output significantly reduces EMI emissions. Pin-selectable dither magnitude and rate allows real-time adjustment of dither settings.
MAX31180 Spread-Spectrum Crystal Multiplier
The MAX31180 is a low-jitter, crystal-based clock generator with an integrated phase-locked loop...
- Generates Spread-Spectrum Clocks from 16MHz to 134MHz
- Selectable Clock Multiplier Rates of 1x, 2x, and 4x
- Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of ±0.5%, ±1.0%, and ±1.5%
- Spread-Spectrum Disable Mode
- Low Cycle-to-Cycle Jitter
- Power-Down Mode with High-Impedance Output
- Low Power Consumption
- 3.0V to 3.6V Single Supply Operation
- -40°C to +125°C Temperature Operation
- Small 8-Lead µSOP Package
- AEC-Q100 Qualified (MAX31180AUA/V+ Only)
MAX31180EVKIT Evaluation Kit for the MAX31180
The MAX31180 evaluation kit (EV kit) is a fully assembled and tested PCB to evaluate the MAX3118...
- Easy Evaluation of the MAX31180AUA+
- +3.3V Single-Supply Operation
- Low Peak Cycle to Cycle 75ns Jitter Typical
- Configurable Clock Multiplier
- Selectable Spread Spectrum Magnitude
- Proven PCB Layout
- Fully Assembled and Tested
DS1181L 20MHz to 134MHz Spread-Spectrum Clock Modulator for LCD Panels
The DS1181L is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-bas...
- Modulates a 20MHz to 134MHz Clock with Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of:
- ±0.5%
- ±1.0%
- ±1.5%
- ±2.0%
- Low 75ps Cycle-to-Cycle Jitter
- Spread-Spectrum Disable Mode
- Pin Compatible with Alliance/PulseCore Semiconductor P2040 Series Devices
- Clock Output Disable
- Low Cost
- Low Power Consumption
- 3.3V Single Voltage Supply
- -40°C to +125°C Temperature Range
- Small 8-Pin TSSOP Package
DS1080L Spread-Spectrum Crystal Multiplier
The DS1080L is a low-jitter, crystal-based clock generator with an integrated phase-locked loop ...
- Generates Spread-Spectrum Clocks from 16MHz to 134MHz
- Selectable Clock Multiplier Rates of 1x, 2x, and 4x
- Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of ±0.5%, ±1.0% and ±1.5%
- Spread-Spectrum Disable Mode
- Low Cycle-to-Cycle Jitter
- Power-Down Mode with High-Impedance Output
- Low Power Consumption
- 3.0V to 3.6V Single Supply Operation
- -40°C to +125°C Temperature Operation
- Small 8-Lead µSOP Package
DS1080CL Spread-Spectrum Crystal Multiplier
The DS1080CL is a low-jitter, crystal-based clock generator with an integrated phase-locked loop...
- Generates Spread-Spectrum Clocks from 8MHz to 64MHz
- Selectable Clock Multiplier Rates of 1x, 2x, and 4x
- Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of ±0.5%, ±1.0%, and ±1.5%
- Spread-Spectrum Disable Mode
- Low Cycle-to-Cycle Jitter
- Power-Down Mode with High-Impedance Output
- Low-Power Consumption
- 3.0V to 3.6V Single-Supply Operation
- -40°C to +125°C Temperature Operation
- Small 8-Pin µSOP Package
DS1081L Spread-Spectrum Clock Modulator for LCD Panels
The DS1081L is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-bas...
- Modulates a 20MHz to 134MHz Clock with Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of:
- ±0.5%
- ±1.0%
- ±1.5%
- ±2.0%
- Low 75ps Cycle-to-Cycle Jitter
- Spread-Spectrum Disable Mode
- Pin Compatible with Alliance/PulseCore Semiconductor P2040 Series Devices
- Clock Output Disable
- Low Power Consumption
- 3.3V Single Voltage Supply
- -40°C to +125°C Temperature Range
- Small 8-Pin TSSOP Package
MAX31D80 Spread-Spectrum Clock Generators
The MAX31C80/MAX31D80 are spread-spectrum clock generators that contain a phase-locked loop (PLL...
- 2MHz to 134MHz Spread-Spectrum Clock Generator
- Input Can Be Either an 8MHz to 34MHz Crystal or 8MHz to 134MHz Clock
- Factory-Programmable Output Frequencies in 2MHz to 134MHz Range
- Low-Cost Crystal at Low Frequency Used to Generate High Frequencies
- On-Board PLL is Capable of Spread-Spectrum Frequency Modulation
- Down- or Center-Dither Spread-Spectrum Frequency Modulation
- User-Configurable Spread-Spectrum Dither Magnitude
- Low Cycle-to-Cycle Jitter
- 3.3V Supply Voltage
- Temperature Range: -40°C to +125°C
- Small Package: 10-Pin TDFN (3mm x 3mm x 0.8mm)
MAX31C80 Spread-Spectrum Clock Generators
The MAX31C80/MAX31D80 are spread-spectrum clock generators that contain a phase-locked loop (PLL...
- 2MHz to 134MHz Spread-Spectrum Clock Generator
- Input Can Be Either an 8MHz to 34MHz Crystal or 8MHz to 134MHz Clock
- Factory-Programmable Output Frequencies in 2MHz to 134MHz Range
- Low-Cost Crystal at Low Frequency Used to Generate High Frequencies
- On-Board PLL is Capable of Spread-Spectrum Frequency Modulation
- Down- or Center-Dither Spread-Spectrum Frequency Modulation
- User-Configurable Spread-Spectrum Dither Magnitude
- Low Cycle-to-Cycle Jitter
- 3.3V Supply Voltage
- Temperature Range: -40°C to +125°C
- Small Package: 10-Pin TDFN (3mm x 3mm x 0.8mm)
MAX9472 Multiple Output Clock Generators with Dual PLLs and OTP
The MAX9471/MAX9472 multipurpose clock generators are ideal for consumer and communication appli...
- 5MHz to 50MHz Input Clock Reference
- Crystal or Input-Clock-Based Reference
- Two Fractional-N Feedback PLLs (4MHz to 200MHz) with Buffered Outputs
- Two Buffered Outputs of Reference Clock
- OTP for Factory-Preset PLL Frequencies Available (Contact Factory)
- Programmable Through I²C Interface or Three-Level Logic Pins for Video or Audio Clocks
- Low-RMS Jitter PLL (14ps for 45MHz)
- Integrated VCXO with ±200ppm Tuning Range
- Available in 20-Pin TQFN and 14-Pin TSSOP Packages
- +3.3V Supply
- -40°C to +85°C Temperature Range
MAX9471 Multiple Output Clock Generators with Dual PLLs and OTP
The MAX9471/MAX9472 multipurpose clock generators are ideal for consumer and communication appli...
- 5MHz to 50MHz Input Clock Reference
- Crystal or Input-Clock-Based Reference
- Two Fractional-N Feedback PLLs (4MHz to 200MHz) with Buffered Outputs
- Two Buffered Outputs of Reference Clock
- OTP for Factory-Preset PLL Frequencies Available (Contact Factory)
- Programmable Through I²C Interface or Three-Level Logic Pins for Video or Audio Clocks
- Low-RMS Jitter PLL (14ps for 45MHz)
- Integrated VCXO with ±200ppm Tuning Range
- Available in 20-Pin TQFN and 14-Pin TSSOP Packages
- +3.3V Supply
- -40°C to +85°C Temperature Range
MAX9485EVKIT Evaluation Kit for the MAX9485
The MAX9485 evaluation kit (EV kit) evaluates the MAX9485, a programmable multiple-output clock ...
- Low Single 3.3V Supply
- Controlled 50Ω Coplanar Traces
- I²C Interface or On-Board Hardwire Options for Output Clock Selection
- Fully Assembled and Tested
MAX9491 Factory-Programmable, Single PLL Clock Generator
The MAX9491 multipurpose clock generator is ideal for communication applications. It offers a fa...
MAX9486EVKIT Evaluation Kit for the MAX9486
The MAX9486 EV kit evaluates the MAX9486, a high performance clock synthesizer with an 8kHz inpu...
MAX31180 Spread-Spectrum Crystal Multiplier
The MAX31180 is a low-jitter, crystal-based clock generator with an integrated phase-locked loop...
- Generates Spread-Spectrum Clocks from 16MHz to 134MHz
- Selectable Clock Multiplier Rates of 1x, 2x, and 4x
- Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of ±0.5%, ±1.0%, and ±1.5%
- Spread-Spectrum Disable Mode
- Low Cycle-to-Cycle Jitter
- Power-Down Mode with High-Impedance Output
- Low Power Consumption
- 3.0V to 3.6V Single Supply Operation
- -40°C to +125°C Temperature Operation
- Small 8-Lead µSOP Package
- AEC-Q100 Qualified (MAX31180AUA/V+ Only)
MAX31180EVKIT Evaluation Kit for the MAX31180
The MAX31180 evaluation kit (EV kit) is a fully assembled and tested PCB to evaluate the MAX3118...
- Easy Evaluation of the MAX31180AUA+
- +3.3V Single-Supply Operation
- Low Peak Cycle to Cycle 75ns Jitter Typical
- Configurable Clock Multiplier
- Selectable Spread Spectrum Magnitude
- Proven PCB Layout
- Fully Assembled and Tested
DS1181L 20MHz to 134MHz Spread-Spectrum Clock Modulator for LCD Panels
The DS1181L is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-bas...
- Modulates a 20MHz to 134MHz Clock with Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of:
- ±0.5%
- ±1.0%
- ±1.5%
- ±2.0%
- Low 75ps Cycle-to-Cycle Jitter
- Spread-Spectrum Disable Mode
- Pin Compatible with Alliance/PulseCore Semiconductor P2040 Series Devices
- Clock Output Disable
- Low Cost
- Low Power Consumption
- 3.3V Single Voltage Supply
- -40°C to +125°C Temperature Range
- Small 8-Pin TSSOP Package
DS1080L Spread-Spectrum Crystal Multiplier
The DS1080L is a low-jitter, crystal-based clock generator with an integrated phase-locked loop ...
- Generates Spread-Spectrum Clocks from 16MHz to 134MHz
- Selectable Clock Multiplier Rates of 1x, 2x, and 4x
- Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of ±0.5%, ±1.0% and ±1.5%
- Spread-Spectrum Disable Mode
- Low Cycle-to-Cycle Jitter
- Power-Down Mode with High-Impedance Output
- Low Power Consumption
- 3.0V to 3.6V Single Supply Operation
- -40°C to +125°C Temperature Operation
- Small 8-Lead µSOP Package
DS1080CL Spread-Spectrum Crystal Multiplier
The DS1080CL is a low-jitter, crystal-based clock generator with an integrated phase-locked loop...
- Generates Spread-Spectrum Clocks from 8MHz to 64MHz
- Selectable Clock Multiplier Rates of 1x, 2x, and 4x
- Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of ±0.5%, ±1.0%, and ±1.5%
- Spread-Spectrum Disable Mode
- Low Cycle-to-Cycle Jitter
- Power-Down Mode with High-Impedance Output
- Low-Power Consumption
- 3.0V to 3.6V Single-Supply Operation
- -40°C to +125°C Temperature Operation
- Small 8-Pin µSOP Package
DS1081L Spread-Spectrum Clock Modulator for LCD Panels
The DS1081L is a spread-spectrum clock modulator IC that reduces EMI in high clock-frequency-bas...
- Modulates a 20MHz to 134MHz Clock with Center Spread-Spectrum Dithering
- Selectable Spread-Spectrum Modulation Magnitudes of:
- ±0.5%
- ±1.0%
- ±1.5%
- ±2.0%
- Low 75ps Cycle-to-Cycle Jitter
- Spread-Spectrum Disable Mode
- Pin Compatible with Alliance/PulseCore Semiconductor P2040 Series Devices
- Clock Output Disable
- Low Power Consumption
- 3.3V Single Voltage Supply
- -40°C to +125°C Temperature Range
- Small 8-Pin TSSOP Package
MAX31D80 Spread-Spectrum Clock Generators
The MAX31C80/MAX31D80 are spread-spectrum clock generators that contain a phase-locked loop (PLL...
- 2MHz to 134MHz Spread-Spectrum Clock Generator
- Input Can Be Either an 8MHz to 34MHz Crystal or 8MHz to 134MHz Clock
- Factory-Programmable Output Frequencies in 2MHz to 134MHz Range
- Low-Cost Crystal at Low Frequency Used to Generate High Frequencies
- On-Board PLL is Capable of Spread-Spectrum Frequency Modulation
- Down- or Center-Dither Spread-Spectrum Frequency Modulation
- User-Configurable Spread-Spectrum Dither Magnitude
- Low Cycle-to-Cycle Jitter
- 3.3V Supply Voltage
- Temperature Range: -40°C to +125°C
- Small Package: 10-Pin TDFN (3mm x 3mm x 0.8mm)
MAX31C80 Spread-Spectrum Clock Generators
The MAX31C80/MAX31D80 are spread-spectrum clock generators that contain a phase-locked loop (PLL...
- 2MHz to 134MHz Spread-Spectrum Clock Generator
- Input Can Be Either an 8MHz to 34MHz Crystal or 8MHz to 134MHz Clock
- Factory-Programmable Output Frequencies in 2MHz to 134MHz Range
- Low-Cost Crystal at Low Frequency Used to Generate High Frequencies
- On-Board PLL is Capable of Spread-Spectrum Frequency Modulation
- Down- or Center-Dither Spread-Spectrum Frequency Modulation
- User-Configurable Spread-Spectrum Dither Magnitude
- Low Cycle-to-Cycle Jitter
- 3.3V Supply Voltage
- Temperature Range: -40°C to +125°C
- Small Package: 10-Pin TDFN (3mm x 3mm x 0.8mm)
MAX9472 Multiple Output Clock Generators with Dual PLLs and OTP
The MAX9471/MAX9472 multipurpose clock generators are ideal for consumer and communication appli...
- 5MHz to 50MHz Input Clock Reference
- Crystal or Input-Clock-Based Reference
- Two Fractional-N Feedback PLLs (4MHz to 200MHz) with Buffered Outputs
- Two Buffered Outputs of Reference Clock
- OTP for Factory-Preset PLL Frequencies Available (Contact Factory)
- Programmable Through I²C Interface or Three-Level Logic Pins for Video or Audio Clocks
- Low-RMS Jitter PLL (14ps for 45MHz)
- Integrated VCXO with ±200ppm Tuning Range
- Available in 20-Pin TQFN and 14-Pin TSSOP Packages
- +3.3V Supply
- -40°C to +85°C Temperature Range
MAX9471 Multiple Output Clock Generators with Dual PLLs and OTP
The MAX9471/MAX9472 multipurpose clock generators are ideal for consumer and communication appli...
- 5MHz to 50MHz Input Clock Reference
- Crystal or Input-Clock-Based Reference
- Two Fractional-N Feedback PLLs (4MHz to 200MHz) with Buffered Outputs
- Two Buffered Outputs of Reference Clock
- OTP for Factory-Preset PLL Frequencies Available (Contact Factory)
- Programmable Through I²C Interface or Three-Level Logic Pins for Video or Audio Clocks
- Low-RMS Jitter PLL (14ps for 45MHz)
- Integrated VCXO with ±200ppm Tuning Range
- Available in 20-Pin TQFN and 14-Pin TSSOP Packages
- +3.3V Supply
- -40°C to +85°C Temperature Range
MAX9485EVKIT Evaluation Kit for the MAX9485
The MAX9485 evaluation kit (EV kit) evaluates the MAX9485, a programmable multiple-output clock ...
- Low Single 3.3V Supply
- Controlled 50Ω Coplanar Traces
- I²C Interface or On-Board Hardwire Options for Output Clock Selection
- Fully Assembled and Tested
MAX9491 Factory-Programmable, Single PLL Clock Generator
The MAX9491 multipurpose clock generator is ideal for communication applications. It offers a fa...
MAX9486EVKIT Evaluation Kit for the MAX9486
The MAX9486 EV kit evaluates the MAX9486, a high performance clock synthesizer with an 8kHz inpu...
Technical Documentation
MAXREFDES179# Reference Design Board
The MAXREFDES179 reference design is a complete Universal Serial Bus (USB) type-C PD solution fe...
MAXREFDES1284: Himalaya Power Evaluation Platform
Himalaya Power Evaluation Platform provides a proven design to evaluate 12 different high-effici...
MAXREFDES105#: Wrist-Based SpO2, Heart Rate (HR), and Heart Rate Variability (HRV) Health Sensor Platform
The MAXREFDES105# is a wrist-worn wearable reference design for heart-rate, heart-rate variabili...
MAXREFDES9004: C-source Reference for Operating the DS2485 Combined with a DS28E18 from a Cortex-M4 Microcontroller
The MAXREFDES9004 is a reference design showcasing the DS2485 features integrated with an Arm® C...
MAXREFDES1233: 1.8V/10A Core Power Supply for CPUs, Microcontrollers, FPGAs, or DDR2 Interfaces Using the MAX20710
The MAXREFDES1233 provides the internal core voltage (VCCINT) for CPUs, microcontrollers, FPGAs,...
MAXREFDES1238: Scalable, Single Input, 6 Output, Power Solution for the Versal ACAP Platform
In this design a single 12V input supplies a circuit which outputs 6 separate rails ranging from...
MAXREFDES1263: True Wireless Stereo Cradle and Earbuds
This solution demonstrates a small size, low power, high effective, high accuracy power manageme...
MAXREFDES165# Four-Channel IO-Link Master
The MAXREFDES165# is a fully IO-Link®-compliant, 4-port IO-Link master reference design. This de...
MAXREFDES1257: 24W/48V DC-DC Boost Converter Using the MAX17597 Peak-Current-Mode Controller
The MAXREFDES1257 is a DC-DC boost power supply that delivers up to 500mA at 48V from an 8V to 1...
MAXREFDES178 and Artificial Intelligence Applications
This document describes the cube camera development platform based on the MAX78000 and MAX32666.
MAXREFDES1264: Digitally Controlled Sine-Wave Generator Using the MAX32630FTHR and MAX7400
The MAXREFDES1264 is a reference design for the MAX32630FTHR and MAX7404 produces an accurate va...
MAXREFDES1253: Miniature 17V, 0.75A No Opto Flyback DC to DC Converter Using the MAX17690
The MAXREFDES1253 illustrates techniques using the No Opto Flyback converter to generate isolate...
MAXREFDES185# Configurable IO with Safety Monitoring
The MAXREFDES185# configurable IO reference design demonstrates a fully software-configurable un...
MAXREFDES1034: High-Efficiency Power Supply for TVs Using MAX17506
The MAXREFDES1034 is an auxiliary power supply for TV applications. This design provides a 5V ou...
MAXREFDES1018: Boost, Single-Output, DC-DC Converter, 1V to 3.3V Input, 13.5V/6mA Output
The MAX1606 is a step-up DC-DC converter that contains a 0.5A internal power switch and a 0.5A o...
MAXREFDES1105: Miniature, 5V/2A, Synchronous, No-Opto Flyback DC-DC Converter with 90.4% Efficiency Using MAX17690 and MAX17606
Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-med...
MAXREFDES1177: PoE Powered Device and 12V/600mA No-Opto Flyback DC-DC Converter Using the MAX17690 and MAX5969B
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a power...
MAXREFDES1142: Ultra miniature Two Layer 4A, 1.8V Step-Down DC-DC Converter with Integrated Switches Using MAX15051
The MAX15051 is a high-efficiency switching regulator that delivers up to 4A load current at out...
MAXREFDES1186: 7.5W 3.3V Offline Flyback Converter Using the MAX17595
The MAX17595 is a peak-current-mode controller for designing wide input-voltage flyback regulato...
MAXREFDES1043: How to Monitor SpO2 Levels Using the MAX30102
The MAXREFDES1043 is designed for SpO2 measurements based on Maxim’s new-generation biosensor—th...
MAXREFDES179# Reference Design Board
The MAXREFDES179 reference design is a complete Universal Serial Bus (USB) type-C PD solution fe...
MAXREFDES1284: Himalaya Power Evaluation Platform
Himalaya Power Evaluation Platform provides a proven design to evaluate 12 different high-effici...
MAXREFDES105#: Wrist-Based SpO2, Heart Rate (HR), and Heart Rate Variability (HRV) Health Sensor Platform
The MAXREFDES105# is a wrist-worn wearable reference design for heart-rate, heart-rate variabili...
MAXREFDES9004: C-source Reference for Operating the DS2485 Combined with a DS28E18 from a Cortex-M4 Microcontroller
The MAXREFDES9004 is a reference design showcasing the DS2485 features integrated with an Arm® C...
MAXREFDES1233: 1.8V/10A Core Power Supply for CPUs, Microcontrollers, FPGAs, or DDR2 Interfaces Using the MAX20710
The MAXREFDES1233 provides the internal core voltage (VCCINT) for CPUs, microcontrollers, FPGAs,...
MAXREFDES1238: Scalable, Single Input, 6 Output, Power Solution for the Versal ACAP Platform
In this design a single 12V input supplies a circuit which outputs 6 separate rails ranging from...
MAXREFDES1263: True Wireless Stereo Cradle and Earbuds
This solution demonstrates a small size, low power, high effective, high accuracy power manageme...
MAXREFDES165# Four-Channel IO-Link Master
The MAXREFDES165# is a fully IO-Link®-compliant, 4-port IO-Link master reference design. This de...
MAXREFDES1257: 24W/48V DC-DC Boost Converter Using the MAX17597 Peak-Current-Mode Controller
The MAXREFDES1257 is a DC-DC boost power supply that delivers up to 500mA at 48V from an 8V to 1...
MAXREFDES178 and Artificial Intelligence Applications
This document describes the cube camera development platform based on the MAX78000 and MAX32666.
MAXREFDES1264: Digitally Controlled Sine-Wave Generator Using the MAX32630FTHR and MAX7400
The MAXREFDES1264 is a reference design for the MAX32630FTHR and MAX7404 produces an accurate va...
MAXREFDES1253: Miniature 17V, 0.75A No Opto Flyback DC to DC Converter Using the MAX17690
The MAXREFDES1253 illustrates techniques using the No Opto Flyback converter to generate isolate...
MAXREFDES185# Configurable IO with Safety Monitoring
The MAXREFDES185# configurable IO reference design demonstrates a fully software-configurable un...
MAXREFDES1034: High-Efficiency Power Supply for TVs Using MAX17506
The MAXREFDES1034 is an auxiliary power supply for TV applications. This design provides a 5V ou...
MAXREFDES1018: Boost, Single-Output, DC-DC Converter, 1V to 3.3V Input, 13.5V/6mA Output
The MAX1606 is a step-up DC-DC converter that contains a 0.5A internal power switch and a 0.5A o...
MAXREFDES1105: Miniature, 5V/2A, Synchronous, No-Opto Flyback DC-DC Converter with 90.4% Efficiency Using MAX17690 and MAX17606
Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-med...
MAXREFDES1177: PoE Powered Device and 12V/600mA No-Opto Flyback DC-DC Converter Using the MAX17690 and MAX5969B
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a power...
MAXREFDES1142: Ultra miniature Two Layer 4A, 1.8V Step-Down DC-DC Converter with Integrated Switches Using MAX15051
The MAX15051 is a high-efficiency switching regulator that delivers up to 4A load current at out...
MAXREFDES1186: 7.5W 3.3V Offline Flyback Converter Using the MAX17595
The MAX17595 is a peak-current-mode controller for designing wide input-voltage flyback regulato...
MAXREFDES1043: How to Monitor SpO2 Levels Using the MAX30102
The MAXREFDES1043 is designed for SpO2 measurements based on Maxim’s new-generation biosensor—th...
Share
Request a Quote