DS1110

10-Tap Silicon Delay Line


Please check latest availability status for a specific part variant.

Description

The DS1110 delay line is an improved replacement for the DS1010. It has ten equally spaced taps providing delays from 5ns to 500ns. The devices are offered in a standard 16-pin SO, or 14-pin TSSOP. The DS1110 series delay lines provide a nominal accuracy of ±5% or ±2ns, whichever is greater, at 5V and +25°C. The DS1110 reproduces the input logic state at the tap 10 output after a fixed delay as specified by the dash number extension of the part number. The DS1110 is designed to produce both leading- and trailing-edge delays with equal precision. Each tap is capable of driving up to ten 74LS type loads. Dallas Semiconductor can customize standard products to meet special needs.
DS1110E: Pin Configuration DS1110E: Pin Configuration Enlarge+

Key Features

  • All-Silicon, 5V, 10-Tap Delay Line
  • Improved, Drop-In Replacement for the DS1010
  • 10 Taps Equally Spaced
  • Delays are Stable and Precise
  • Leading- and Trailing-Edge Accuracy
  • Delay Tolerance ±5% or ±2ns, whichever is Greater, at 5V and +25°C
  • Economical
  • Auto-Insertable, Low Profile
  • Low-Power CMOS
  • TTL/CMOS Compatible
  • Vapor Phase, IR, and Wave Solderable
  • Fast-Turn Prototypes
  • Delays Specified Over Commercial and Industrial Temperature Ranges
  • Custom Delays Available
  • Standard 16-Pin SO or 14-Pin TSSOP
  • Applications/Uses

    • Automated Test Equipment (ATE)
    • Communication Systems
    • Medical Devices
    • PC Peripheral Devices

    See parametric specs for Delay-Lines (Non-Programmable) (6)


    Part NumberFunctionsTapsTotal Delays
    (ns)
    VSUPPLY
    (V)
    ΔVSUPPLYPackage/PinsBudgetary
    Price
    (See Notes)
    DS1110 Tapped1050 to 5005±5%
    SOIC (W)/16
    TSSOP/14
    $4.41 @1k

    Pricing Notes:
    This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
    Product Reliability Reports: DS1110.pdf 
    Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources