MAX14627

Low-Power Headset Detectors with SEND/END Button Support

Versatile Jack Detection and Control with High-Performance MIC Bias and Ultra-Low-Power Mode


Please check latest availability status for a specific part variant.

Description

The MAX14627/MAX14628 provide a simple solution for detecting the insertion and managing the operation of a 3.5mm stereo headset with a microphone. These devices integrate all circuitry needed to detect SEND/END button press events and generate required microphone bias voltages, and are fully compatible with Windows® Mobile 7.

The devices need only three GPIOs from the host controller to select between call mode and standby mode, and monitor the SEND/END and jack insertion status. In call mode, the low-noise LDO is enabled to provide DC bias to the externally preamplified microphone. In standby mode, microphone low-power pulsing is enabled to reduce supply current while waiting for a SEND/END button press event. Two open-drain outputs signal the host controller when an insertion/removal or SEND/END button press event occurs. If a 3P headset without a microphone is inserted, the low-power pulsing can be disabled by setting the MODE input to high impedance.

The MAX14627 operates from a 2.5V to 5.5V input voltage supply and features an internal 2.2V LDO output, while the MAX14628 operates from a 3.1V to 5.5V voltage supply and features an internal 2.8V LDO output voltage. Both devices control jack insertion detection by monitoring a 3.5mm socket with a normally open jack insertion switch. Additionally, the MAX14628 features open microphone detection.

The MAX14627/MAX14628 are available in an 8-pin TDFN package, and are fully specified over the -40°C to +85°C extended temperature range.
MAX14627, MAX14628: Typical Operating Circuit MAX14627, MAX14628: Typical Operating Circuit Enlarge+

Key Features

  • Versatile Jack Detection and Control
    • MODE Three-State Microphone Bias Control
    • MIC Switch Ground Detection (MAX14627)
    • MIC Switch Open and Ground Detection (MAX14628)
  • Compatible with Windows Mobile 7 and Google Android
    • Microphone Button Press Detection
  • High-Performance MIC Bias and Power Savings
    • No Pop-Up Noises
    • Ultra-Low Noise, High-PSRR MIC Bias
    • Low-Power MIC Idle Mode
    • Automatic Ultra-Low-Power Mode When Microphone Is Disabled
  • PCB Space and Cost Savings
    • Integrated ±15kV ESD Protection (HBM) on DETIN and MIC Input Terminals
    • Small 8-Pin (2mm x 2mm) TDFN Package

Applications/Uses

  • Cell Phones
  • Portable Media Players
  • Tablet/Laptop PCs
Part NumberVSUPPLY
(V)
Low-Noise LDO Output
(V)
MIC Switch DetectionControl InputsSupply Current for MIC Detection
(µA)
Pop-Up Noise EliminationESD ProtectionPackage/PinsOper. Temp.
(°C)
MAX14628 3.1 to 5.52.8Open and GroundMIC Mode1.9Plug-in and Plug-out15kV HBM on MIC and DETIN
TDFN-CU/8
-40 to +85
See All Audio Jack Detectors (3)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Product Reliability Reports: MAX14627.pdf 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources