High-Speed, Low-Power, Single-Supply Multichannel, Video Multiplexer-Amplifiers

Please check latest availability status for a specific part variant.


The MAX4310–MAX4315 single-supply mux-amps combine high-speed operation, low-glitch switching, and excellent video specifications. The six products in this family are differentiated by the number of multiplexer inputs and the gain configuration. The MAX4310/MAX4311/MAX4312 integrate 2-/4-/8-channel multiplexers, respectively, with an adjustable gain amplifier optimized for unity-gain stability. The MAX4313/MAX4314/MAX4315 integrate 2-/4-/8-channel multiplexers, respectively, with a +2V/V fixed-gain amplifier. All devices have 40ns channel switching time and low 10mVp-p switching transients, making them ideal for video-switching applications. They operate from a single +4V to +10.5V supply, or from dual supplies of ±2V to ±5.25V, and they feature Rail-to-Rail outputs and an input common-mode voltage range that extends to the negative supply rail.

The MAX4310/MAX4311/MAX4312 have a -3dB bandwidth of 280MHz/345MHz/265MHz and up to a 460V/µs slew rate. The MAX4313/MAX4314/MAX4315, with 150MHz/127MHz/97MHz -3dB bandwidths up to a 540V/µs slew rate, and a fixed gain of +2V/V, are ideally suited for driving back-terminated cables. Quiescent supply current is as low as 6.1mA, while low-power shutdown mode reduces supply current to as low as 560µA and places the outputs in a high-impedance state. The MAX4310–MAX4315's internal amplifiers maintain an open-loop output impedance of only 8Ω over the full output voltage range, minimizing the gain error and bandwidth changes under loads typical of most rail-to-rail amplifiers. With differential gain and phase errors of 0.06% and 0.08°, respectively, these devices are ideal for broadcast video applications.
MAX4310, MAX4311, MAX4312, MAX4313, MAX4314, MAX4315: Typical Operating Circuit MAX4310, MAX4311, MAX4312, MAX4313, MAX4314, MAX4315: Typical Operating Circuit Enlarge+

Key Features

  • Single-Supply Operation Down to +4V
  • 345MHz -3dB Bandwidth (MAX4311)
    150MHz -3dB Bandwidth (MAX4313)
  • 540V/µs Slew Rate (MAX4313)
  • Low 6.1mA Quiescent Supply Current
  • 40ns Channel Switching Time
  • Ultra-Low 10mVp-p Switching Transient
  • 0.06%/0.08° Differential Gain/Phase Error
  • Rail-to-Rail Outputs: Drives 150Ω to within 730mV of the Rails
  • Input Common-Mode Range Includes Negative Rail
  • Low-Power Shutdown Mode
  • Available in Space-Saving 8-Pin µMAX® and 16-Pin QSOP Packages


  • 75Ω Video Cable Drivers
  • Broadcast Video
  • Flash ADC Input Buffers
  • High-Speed Signal Processing
  • Medical Imaging
  • Multimedia Products
  • Video Crosspoint Switching
  • Video Signal Multiplexing

See parametric specs for Video Muxes and Crosspoints (Buffered) (8)

Part NumberInputsOutputsBW
(@ -3dB)(0.1dB min)(Single)(Dual)
MAX4310 212806055
MAX4311 434540
MAX4312 826535
MAX4313 215040
MAX4314 412778
MAX4315 89746

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX4313EVKIT: Evaluation Kit for the MAX4310 and MAX4313
Product Reliability Reports: MAX4311.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources