DG211

Quad SPST CMOS Analog Switches


Please check latest availability status for a specific part variant.

Description

The DG201A and DG211 are normally closed, quad single-pole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with power supplies ranging from ±4.5V to ±18V. Maxim guarantees that these switches will not latch up if the power supplies are disconnected with input signals still connected.

Both devices have guaranteed break-before-make switching. The DG201A differs from the DG211 primarily in switching speeds. The DG201A has a maximum turn-off time of 450ns and a maximum turn-on time of 600ns. The DG211 has a maximum turn-off time of 500ns and a maximum turn-on time of 1000ns.

Compared to the original manufacturer's products, Maxim's DG201A and DG211 consume significantly lower power making them better suited for portable applications. Maxim has also eliminated the need for the third (VL) power supply that is required for the operation of the original manufacturer's DG211.
DG201A, DG211: Typical Operating Circuit DG201A, DG211: Typical Operating Circuit Enlarge+

Key Features

  • Guaranteed ±4.5V to ±18V Operation
  • No VL Supply Required
  • Nonlatching with Supplies Turned Off and Input Signals Present
  • CMOS and TTL Logic Compatible
  • Monolithic, Low-Power CMOS Design

Applications/Uses

  • Communication Systems
  • Guidance and Control Systems
  • Heads-Up Displays
  • Military Radios
  • PBX, PABX
  • Test Equipment
  • Winchester Disk Drives
Request Reliability Report for: DG211 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources