Top
Maxim Confidential 
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
Parametric specs for Active Filters
| Filter Type | Bandpass |
| Filter Sections | 2 |
| Order Per Filter Section | 2 |
| Highest Cutoff (kHz) (min) | 57 |
| Lowest Cutoff (Hz) (max) | 0.4 |
| Filter Class | Switched Cap |
| Filter Characteristic | Programmable |
| Program Method | Pin Strap |
| Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
| Package/Pins | PDIP/24 SOIC (W)/24 |
| Budgetary Price (See Notes) | 9.06 |
View More
Simplified Block Diagram
Technical Docs
| Data Sheet | Pin-Programmable Universal and Bandpass Filters | May 13, 2008 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Parameters
Parametric specs for Active Filters
| Filter Type | Bandpass |
| Filter Sections | 2 |
| Order Per Filter Section | 2 |
| Highest Cutoff (kHz) (min) | 57 |
| Lowest Cutoff (Hz) (max) | 0.4 |
| Filter Class | Switched Cap |
| Filter Characteristic | Programmable |
| Program Method | Pin Strap |
| Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
| Package/Pins | PDIP/24 SOIC (W)/24 |
| Budgetary Price (See Notes) | 9.06 |
Key Features
- 32-Step Center Frequency Control
- 128-Step Q Control
- Independent Q and f0 Programming
- Guaranteed Clock to f0 Ratio—1% (A grade)
- 75kHz f0 Range (MAX264/268)
- Single +5V and ±5V Operation
Applications/Uses
Description
The MAX263/264 and MAX267/268 CMOS switched-capacitor active filters are designed for precision filtering applications. Center frequency, Q, and operating mode are all selected via pin-strapped inputs. The MAX263/264 uses no external components for a variety of bandpass, lowpass, highpass, notch and allpass filters. The MAX267/268 is dedicated to bandpass applications and includes an uncommitted op-amp. Two second-order filter sections are included in both devices.
An input clock and a 5-bit programming input precisely set the filter center/corner frequency. Q is also programmed from 0.5 to 64. Separate clock inputs for each filter half operate either an external clock or a crystal.
The MAX263 and 267 operate with center frequencies up to 57kHz while the MAX264 and 268 extend the f0 range to 140kHz by employing lower fCLK/f0 ratios. The MAX263/264 is supplied in 28 pin wide DIP and small outline packages while the MAX267/268 is supplied in 24 pin narrow DIP and wide SO packages. All devices are available in commercial, extended, and military temperature ranges.
An input clock and a 5-bit programming input precisely set the filter center/corner frequency. Q is also programmed from 0.5 to 64. Separate clock inputs for each filter half operate either an external clock or a crystal.
The MAX263 and 267 operate with center frequencies up to 57kHz while the MAX264 and 268 extend the f0 range to 140kHz by employing lower fCLK/f0 ratios. The MAX263/264 is supplied in 28 pin wide DIP and small outline packages while the MAX267/268 is supplied in 24 pin narrow DIP and wide SO packages. All devices are available in commercial, extended, and military temperature ranges.
Technical Docs
| Data Sheet | Pin-Programmable Universal and Bandpass Filters | May 13, 2008 |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Request a Quote