/
/
/
Amplifiers 
/
Top
/content/maximintegrated/en/products/analog/amplifiers/operational-amplifiers 
Operational Amplifiers, more commonly called Op-Amps, play a key role in conditioning analog signals. There are many types of op-amps and many parameters that drive the performance of the applications that utilize them.
Featured Video
Using the MAX40007 nanoPower Op Amp in a Force Sense Application
9:05 August 07, 2018
Solutions
Technical Documentation
Featured Products
MAX4472 Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +...
- Ultra-Low 750nA Supply Current Per Amplifier
- Ultra-Low +1.8V Supply Voltage Operation
- Ground-Sensing Input Common-Mode Range
- Outputs Swing Rail-to-Rail
- Outputs Source and Sink 11mA of Load Current
- No Phase Reversal for Overdriven Inputs
- High 120dB Open-Loop Voltage Gain
- Low 500µV Input Offset Voltage
- 9kHz Gain-Bandwidth Product (MAX4470/MAX4471/MAX4472)
- 40kHz Gain-Bandwidth Product (MAX4464/MAX4474)
- 250pF (min) Capacitive Load Capability
- Available in Tiny, 6-Bump WLP, 5-Pin SC70, and 8-Pin SOT23 Packages
MAX44265 Rail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
The MAX44265 op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ...
- 200kHz GBW
- Ultra-Low 4µA Supply Current
- Single 1.8V to 5.5V Supply Voltage Range
- Ultra-Low 1pA Input Bias Current
- Rail-to-Rail Input and Output Voltage Ranges
- Low ±200µV Input Offset Voltage
- Low 0.001µA Shutdown Current
- High-Impedance Output During Shutdown
- Unity-Gain Stable
- Available in a Tiny, 0.9mm x 1.3mm, 6-Bump WLP Package
MAX9618 Single/Dual SC70, Zero-Drift, High-Efficiency, 1.5MHz Op Amps with RRIO
The MAX9617–MAX9620 are low-power, zero-drift operational amplifiers available in space-saving S...
- Extends Battery Life
- Low 59µA Quiescent Current
- Single 1.8V to 5.5V Supply Voltage Range
- Power-Saving Shutdown Mode (MAX9619)
- Supports a Wide Range of Precision Applications
- Very Low 10µV (max) Input Offset Voltage
- Ultra-Low 10pA Input Bias Current
- 1.5MHz GBW
- Unity-Gain Stable
- 0.42µVp-p from 0.1Hz to 10Hz
- 42nV/√Hz at 1kHz
- Rail-to-Rail Inputs and Outputs
- Saves Board Space
- 5-Pin SC70 (MAX9620), 6-Pin SC70 (MAX9617/MAX9619), and 8-Pin SC70 (MAX9618) Packages
MAX44242 20V, Low Input Bias-Current, Low-Noise, Dual Op Amplifier
The MAX44242 provides a combination of high voltage, low noise, low input bias current in a dual...
- 2.7V to 20V Single Supply or ±1.35V to ±10V Dual Supplies
- 0.5pA (max) Input Bias Current
- 5nV/
Input Voltage Noise - 10MHz Bandwidth
- 8V/µs Slew Rate
- Rail-to-Rail Output
- Integrated EMI Filters
- 1.2mA Supply Current per Amplifier
MAX44250 20V, Ultra-Precision, Low-Noise Op Amps
The MAX44250/MAX44251/MAX44252 are 20V, ultra-precision, low-noise, low-drift amplifiers that of...
- High Accuracy Enables Precision Signal Chain Acquisition
- 6µV Input Offset Voltage (max) at Room Temperature
- TCVOS of 19nV/°C (max)
- Low 5.9nV/ Input-Referred Voltage Noise
- 123nVP-P in 0.1Hz to 10Hz
- 10MHz Gain-Bandwidth Product
- Rail-to-Rail Output
- Fast 400ns Settling Time
- 2.7V to 20V Power-Supply Range Supports Wide Range of Sensors
- Integrated EMI Filter Reduces Impact of Radio Frequency Interference on Signal Chain Performance
MAX44242EVKIT Evaluation Kit for the MAX44242
The MAX44242 evaluation kit (EV kit) provides a proven design to evaluate the MAX44242 low-input...
- Accommodates Multiple Op-Amp Configurations
- Rail-to-Rail Outputs
- Accommodates Easy-to-Use 0805 Components
- 2.7V to 20V Single Supply or ±1.35V to ±10V Dual Supplies
- Proven PCB Layout
- Fully Assembled and Tested
MAX44250EVKIT Evaluation Kit for the MAX44250
The MAX44250 evaluation kit (EV kit) provides a proven design to evaluate the MAX44250 low-power...
- Accommodates Multiple Op-Amp Configurations
- Rail-to-Rail Inputs/Output
- Accommodates Easy-to-Use 0805 Components
- Proven PCB Layout
- Fully Assembled and Tested
MAX44265EVKIT Evaluation Kit for the MAX44265
The MAX44265 evaluation kit (EV kit) provides a proven design to evaluate the MAX44265 low-power...
- +1.8V to +5.5V Supply Voltage Range
- Accommodates Multiple Op-Amp Configurations
- Component Pads Allow for Sallen-Key Filter
- Rail-to-Rail Inputs/Outputs
- Accommodates Easy-to-Use 0805 Components
- Proven PCB Layout
- Fully Assembled and Tested
MAX9618EVKIT Evaluation Kit for the MAX9618
The MAX9618 evaluation kit (EV kit) provides a proven design to evaluate the MAX9618 dual low-po...
- Accommodates Multiple Op-Amp Configurations
- Component Pads Allow for Sallen-Key Filter
- Rail-to-Rail Inputs/Outputs
- Accommodates Easy-to-Use 0805 Components
- Proven PCB Layout
- Fully Assembled and Tested
MAX4472 Single/Dual/Quad, +1.8V/750nA, SC70, Rail-to-Rail Op Amps
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474 family of micropower op amps operate from a single +...
- Ultra-Low 750nA Supply Current Per Amplifier
- Ultra-Low +1.8V Supply Voltage Operation
- Ground-Sensing Input Common-Mode Range
- Outputs Swing Rail-to-Rail
- Outputs Source and Sink 11mA of Load Current
- No Phase Reversal for Overdriven Inputs
- High 120dB Open-Loop Voltage Gain
- Low 500µV Input Offset Voltage
- 9kHz Gain-Bandwidth Product (MAX4470/MAX4471/MAX4472)
- 40kHz Gain-Bandwidth Product (MAX4464/MAX4474)
- 250pF (min) Capacitive Load Capability
- Available in Tiny, 6-Bump WLP, 5-Pin SC70, and 8-Pin SOT23 Packages
MAX44265 Rail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
The MAX44265 op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ...
- 200kHz GBW
- Ultra-Low 4µA Supply Current
- Single 1.8V to 5.5V Supply Voltage Range
- Ultra-Low 1pA Input Bias Current
- Rail-to-Rail Input and Output Voltage Ranges
- Low ±200µV Input Offset Voltage
- Low 0.001µA Shutdown Current
- High-Impedance Output During Shutdown
- Unity-Gain Stable
- Available in a Tiny, 0.9mm x 1.3mm, 6-Bump WLP Package
MAX9618 Single/Dual SC70, Zero-Drift, High-Efficiency, 1.5MHz Op Amps with RRIO
The MAX9617–MAX9620 are low-power, zero-drift operational amplifiers available in space-saving S...
- Extends Battery Life
- Low 59µA Quiescent Current
- Single 1.8V to 5.5V Supply Voltage Range
- Power-Saving Shutdown Mode (MAX9619)
- Supports a Wide Range of Precision Applications
- Very Low 10µV (max) Input Offset Voltage
- Ultra-Low 10pA Input Bias Current
- 1.5MHz GBW
- Unity-Gain Stable
- 0.42µVp-p from 0.1Hz to 10Hz
- 42nV/√Hz at 1kHz
- Rail-to-Rail Inputs and Outputs
- Saves Board Space
- 5-Pin SC70 (MAX9620), 6-Pin SC70 (MAX9617/MAX9619), and 8-Pin SC70 (MAX9618) Packages
MAX44242 20V, Low Input Bias-Current, Low-Noise, Dual Op Amplifier
The MAX44242 provides a combination of high voltage, low noise, low input bias current in a dual...
- 2.7V to 20V Single Supply or ±1.35V to ±10V Dual Supplies
- 0.5pA (max) Input Bias Current
- 5nV/ Input Voltage Noise
- 10MHz Bandwidth
- 8V/µs Slew Rate
- Rail-to-Rail Output
- Integrated EMI Filters
- 1.2mA Supply Current per Amplifier
MAX44250 20V, Ultra-Precision, Low-Noise Op Amps
The MAX44250/MAX44251/MAX44252 are 20V, ultra-precision, low-noise, low-drift amplifiers that of...
- High Accuracy Enables Precision Signal Chain Acquisition
- 6µV Input Offset Voltage (max) at Room Temperature
- TCVOS of 19nV/°C (max)
- Low 5.9nV/ Input-Referred Voltage Noise
- 123nVP-P in 0.1Hz to 10Hz
- 10MHz Gain-Bandwidth Product
- Rail-to-Rail Output
- Fast 400ns Settling Time
- 2.7V to 20V Power-Supply Range Supports Wide Range of Sensors
- Integrated EMI Filter Reduces Impact of Radio Frequency Interference on Signal Chain Performance
MAX44242EVKIT Evaluation Kit for the MAX44242
The MAX44242 evaluation kit (EV kit) provides a proven design to evaluate the MAX44242 low-input...
- Accommodates Multiple Op-Amp Configurations
- Rail-to-Rail Outputs
- Accommodates Easy-to-Use 0805 Components
- 2.7V to 20V Single Supply or ±1.35V to ±10V Dual Supplies
- Proven PCB Layout
- Fully Assembled and Tested
MAX44250EVKIT Evaluation Kit for the MAX44250
The MAX44250 evaluation kit (EV kit) provides a proven design to evaluate the MAX44250 low-power...
- Accommodates Multiple Op-Amp Configurations
- Rail-to-Rail Inputs/Output
- Accommodates Easy-to-Use 0805 Components
- Proven PCB Layout
- Fully Assembled and Tested
MAX44265EVKIT Evaluation Kit for the MAX44265
The MAX44265 evaluation kit (EV kit) provides a proven design to evaluate the MAX44265 low-power...
- +1.8V to +5.5V Supply Voltage Range
- Accommodates Multiple Op-Amp Configurations
- Component Pads Allow for Sallen-Key Filter
- Rail-to-Rail Inputs/Outputs
- Accommodates Easy-to-Use 0805 Components
- Proven PCB Layout
- Fully Assembled and Tested
MAX9618EVKIT Evaluation Kit for the MAX9618
The MAX9618 evaluation kit (EV kit) provides a proven design to evaluate the MAX9618 dual low-po...
- Accommodates Multiple Op-Amp Configurations
- Component Pads Allow for Sallen-Key Filter
- Rail-to-Rail Inputs/Outputs
- Accommodates Easy-to-Use 0805 Components
- Proven PCB Layout
- Fully Assembled and Tested
Share
Request a Quote