High-Efficiency, 1.5MHz Op Amps with RRIO

Ultra-Low Power, Zero-Drift Precision Op Amps in SC70 Packages

Please check latest availability status for a specific part variant.


The MAX9617–MAX9620 are low-power, zero-drift operational amplifiers available in space-saving SC70 packages. They are designed for use in portable consumer, medical, and industrial applications.

The MAX9617–MAX9620 feature rail-to-rail CMOS inputs and outputs, a 1.5MHz GBW at just 59µA supply current and 10µV (max) zero-drift input offset voltage over time and temperature. The zero-drift feature reduces the high 1/f noise typically found in CMOS input operational amplifiers, making it useful for a wide variety of low-frequency measurement applications.

The MAX9617 and MAX9619 are available in a space-saving, 2mm x 2mm, 6-pin SC70 package. The MAX9619 features a power-saving shutdown mode. The MAX9618 is available in a 2mm x 2mm, 8-pin SC70 package. The MAX9620 is available in a 2mm x 2mm, 5-pin SC70 package. All devices are specified over the -40°C to +125°C automotive operating temperature range.

MAX9617, MAX9618: Functional Diagrams MAX9617, MAX9618: Functional Diagrams Enlarge+

Key Features

  • Extends Battery Life
    • Low 59µA Quiescent Current
    • Single 1.8V to 5.5V Supply Voltage Range
    • Power-Saving Shutdown Mode (MAX9619)
  • Supports a Wide Range of Precision Applications
    • Very Low 10µV (max) Input Offset Voltage
    • Ultra-Low 10pA Input Bias Current
    • Unity-Gain Stable
    • 0.42µVp-p from 0.1Hz to 10Hz
    • 1.5MHz GBW
    • 42nV/√Hz at 1kHz
    • Rail-to-Rail Inputs and Outputs
  • Saves Board Space
    • 5-Pin SC70 (MAX9620), 6-Pin SC70 (MAX9617/MAX9619), and 8-Pin SC70 (MAX9618) Packages


  • Battery-Powered Devices
  • Cardiac Monitors
  • Loop-Powered Systems
  • Portable Medical Devices
  • Sensor Interfaces

See parametric specs for Operational Amplifiers (177)

Part NumberAmps.Rail to RailICC per Amp.
Low Input Bias CMOS InputsInput IBIAS
Unity Gain BW
Slew Rate
typminmaxmaxtyptypmaxtyptyp<See Notes
MAX9617 1Input/Output591.85.510135135Yes0.081.50.742
$1.11 @1k
MAX9618 2
$1.74 @1k
MAX9619 1
$1.17 @1k
MAX9620 1
$1.23 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX9617EVKIT: Evaluation Kit for the MAX9617
MAX9618EVKIT: Evaluation Kit for the MAX9618
MAX5216LPT: Evaluation Kit for the Reference Design of 4-20mA Loop-Powered Transmitter
Product Reliability Reports: MAX9618.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources

30ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparator

  • Fast, 30ns Propagation Delay (10mV Overdrive)
  • Low-Power 100μA Supply Current (VDD = 3V)
  • Optimized for 3V and 5V Applications

1V, Low-Power, Precision Operational Amplifier

  • Supply Voltage Range: 0.9V to 3.6V
  • Low 25.5µA Quiescent Current
  • Very Low 1μV (typ) Input Offset Voltage

High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V