Low-Power, High-Efficiency, Single/Dual, Rail-to-Rail I/O Op Amps

Save Maintenance System Downtime and Self-Calibration Feature Ensures System Accuracy Over Time and Temperature

Please check latest availability status for a specific part variant.


The MAX9613/MAX9615 are low-power precision op amps with rail-to-rail inputs and rail-to-rail outputs. They feature precision MOS inputs powered from an internal charge pump to eliminate crossover distortion that is common to complementary input-pair type amplifier architectures.

These devices are ideal for a large number of signal processing applications such as photodiode transimpedance amplifiers and filtering/amplification of a wide variety of signals in industrial equipment. The devices also feature excellent RF immunity, making them ideal for portable applications.

The MAX9613/MAX9615 feature a self-calibration system (on power-up), eliminating the effects of temperature and power-supply variations.

The MAX9613/MAX9615 are capable of operating from a 1.7V to 5.5V supply voltage over the 0°C to +70°C temperature range, and from 1.8V to 5.5V over the -40°C to +125°C automotive temperature range.

Both singles and duals are available in tiny SC70 packages. The MAX9613 features a high-impedance output while in shutdown.
MAX9613, MAX9615: Typical Application Circuit MAX9613, MAX9615: Typical Application Circuit Enlarge+

Key Features

  • VCC = 1.7V to 5.5V (0°C to +70°C)
  • VCC = 1.8V to 5.5V (-40°C to +125°C)
  • Low 100µV (max) VOS
  • Rail-to-Rail Inputs and Outputs
  • Low 210µA Supply Current, 1µA in Shutdown
  • Autotrim Offset Calibration
  • 2.8MHz Bandwidth
  • Excellent RF Immunity


  • General Purpose Signal Processing
  • Industrial and Medical Sensors
  • Notebooks, Portable Media Players
Part NumberAmps.Rail to RailVSUPPLY (Total)
ICC per Amp.
Low Input Bias CMOS InputsInput IBIAS
Unity Gain BW
Slew Rate
minmaxtypmaxtyptypmaxtyptyp<See Notes
MAX9613 1Input/Output1.75.5220100100106Yes0.001552.81.328
$0.70 @1k
MAX9615 2
$1.05 @1k
See All Operational Amplifiers (174)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX9613EVKIT: Evaluation Kit for the MAX9613

Technical Documents

App Note 5129 Stabilize Your Transimpedance Amplifier
App Note 4301 The Zero-Transistor IC, a New Plateau in IC Design

Quality and Environmental Data

Request Reliability Report for: MAX9613 
Lead-Free Package Tin (Sn) Whisker Reports

Tools & Models

  • MAX9613 Orcad Library
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >


    Related Resources

    DOCSIS 3.1 Programmable-Gain Amplifier

    • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
    • Covers 5MHz–204MHz Output Bandwidth
    • Dual Outputs Eliminates Need for an External RF Switch

    1.7V, Dual microPower Comparator with Built-In Reference

    • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
    • Internal Precision Reference Saves Space and Cost of an External Reference
    • < 1% at Room Temperature, < 2.5% Over Temperature Reference

    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660

    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660