MAX900

High-Speed, Low-Power Voltage Comparators


Please check latest availability status for a specific part variant.

Description

The MAX900–MAX903 high-speed, low-power, single/dual/quad voltage comparators feature differential analog inputs and TTL-logic outputs with active internal pullups. Fast propagation delay (8ns typ at 5mV overdrive) makes the MAX900–MAX903 ideal for fast A/D converters and sampling circuits, line receivers, V/F converters, and many other data-discrimination applications.

All comparators can be powered from separate analog and digital power supplies or from a single combined supply voltage. The analog input common-mode range includes the negative rail, allowing ground sensing when powered from a single supply. The MAX900–MAX903 consume 18mW per comparator when powered from +5V.

The MAX900–MAX903 are equipped with independent TTL-compatible latch inputs. The comparator output states are held when the latch inputs are driven low. The MAX901 provides the same performance as the MAX900/MAX902/MAX903 with the exception of the latches.

For newer, pin-for-pin compatible parts with the same speed and only half the power dissipation, see the MAX9201/MAX9202/MAX9203 data sheet.
MAX901, MAX902, MAX903: Pin Configurations MAX901, MAX902, MAX903: Pin Configurations Enlarge+

Key Features

  • 8ns (typ) Propagation Delay
  • 18mW/Comparator Power Consumption (+5V, typ)
  • Separate Analog and Digital Supplies
  • Flexible Analog Supply: +5V to +10V or ±5V
  • Input Range Includes Negative Supply Rail
  • TTL-Compatible Outputs
  • TTL-Compatible Latch Inputs (Except MAX901)

Applications/Uses

  • High-Speed A/D Converters
  • High-Speed Data Sampling
  • High-Speed V/F Converters
  • Input Trigger Circuitry
  • Line Receivers
  • PWM Circuits
  • Threshold Detectors

See parametric specs for Comparators (96)


Part NumberComp-
arators
tPD
(ns)
Input RangeVSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Comp.
(µA)
VOS
(mV)
VOS
(mV)
Logic OutOper. Temp.
(°C)
Package/PinsBudgetary
Price
typminmaxmaxtypmaxSee Notes
MAX901 48to Neg. Rail51040000.52Push-Pull
-40 to +85
0 to +70
CDIP/16
DICE SALES/N
PDIP/16
SOIC (N)/16
$7.53 @1k
MAX902 214
CDIP/14
PDIP/14
SOIC (N)/14
$5.70 @1k
MAX903 114
CDIP/8
PDIP/8
SOIC (N)/8
$4.79 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
Request Reliability Report for: MAX900 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX32000
High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    MAX40027
    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V