MAX4462

SOT23, 3V/5V, Single-Supply, Rail-to-Rail Instrumentation Amplifiers

Precision Instrumentation Amplifier Fits in SOT23 Package


Please check latest availability status for a specific part variant.

Description

The MAX4460/MAX4461/MAX4462 are instrumentation amplifiers with precision specifications, low-power consumption, and excellent gain-bandwidth product. Proprietary design techniques allow ground-sensing capability combined with ultra-low input current and increased common-mode rejection performance. These rail-to-rail output instrumentation amplifiers are offered in fixed or adjustable gains and the option for either a shutdown mode or a pin to set the output voltage relative to an external reference (see Ordering Information and Selector Guide in the full data sheet).

The MAX4460 has an adjustable gain and uses ground as its reference voltage. The MAX4461 is offered in fixed gains of 1, 10, and 100, uses ground as its reference voltage, and has a logic-controlled shutdown input. The MAX4462 is offered in fixed gains of 1, 10, and 100 and has a reference input pin (REF). REF sets the output voltage for zero differential input to allow bipolar signals in single-supply applications.

The MAX4460/MAX4461/MAX4462 have high-impedance inputs optimized for small-signal differential voltages. The MAX4461/MAX4462 are factory trimmed to gains of 1, 10, or 100 (suffixed U, T, and H) with ±0.1% accuracy. The typical offset of the MAX4460/MAX4461/MAX4462 is 100µV. All devices have a gain-bandwidth product of 2.5MHz.

These amplifiers operate with a single-supply voltage from 2.85V to 5.25V and with a quiescent current of only 700µA (less than 1µA in shutdown for the MAX4461). The MAX4462 can also be operated with dual supplies. Smaller than most competitors, the MAX4460/MAX4461/MAX4462 are available in space-saving 6-pin SOT23 and TDFN packages.
MAX4460, MAX4461, MAX4462: Typical Application Circuit MAX4460, MAX4461, MAX4462: Typical Application Circuit Enlarge+

Key Features

  • Tiny 6-Pin SOT23 and TDFN Package
  • Input Negative Rail Sensing
  • 1pA (typ) Input Bias Current
  • 100µV Input Offset Voltage
  • Rail-to-Rail Output
  • 2.85V to 5.25V Single Supply
  • 700µA Supply Current
  • ±0.1% Gain Error
  • 2.5MHz Gain-Bandwidth Product
  • 18nV/ Input-Referred Noise

Applications/Uses

  • Battery-Powered Medical Equipment
  • Differential Voltage Amplification
  • Industrial Process Controls
  • Low-Noise Microphone Preamplifier
  • Precision Low-Side Current Sense
  • Strain-Gauge Amplifiers
  • Transducer Interface
Part NumberArchitectureAmps.VCMVRRail to RailAV
(V/V)
VSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Amp.
(mA)
ICC per Amp.
(mA)
VOS
(µV)
CMRR @DC
(dB)
PSRR @DC
(dB)
Input IBIAS
(nA)
Unity Gain BW
(MHz)
Slew Rate
(V/µs)
VCMVR
(V)
en
(nV/√Hz)
Noise Spec'd @Low Pwr. ShutdnOper. Temp.
(°C)
Package/PinsBudgetary
Price
to Neg. Railminmaxtypmaxmaxtyptypmaxtyptyp<See Notes
MAX4460 Indirect Current-Feedback1YesOutput OnlyAdj.2.855.250.71.15001201000.12.50.5VSS-0.1 to VDD-1.71810kHzNo-40 to +85
SOIC (N)/8
SOT23/6
TDFN/6
$1.33 @1k
MAX4461 
1
10
100
Yes
SOIC (N)/8
SOT23/6
TDFN/6
MAX4462 
1
10
100
No
SOIC (N)/8
SOT23/6
TDFN/6
See All Instrumentation/Difference Amplifiers (11)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX40661
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660

MAX40660
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660

MAX40026
280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V

MAX40025C
280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V

MAX40025A
280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V