MAX4434

Single-Supply, 150MHz, 16-Bit Accurate, Ultra-Low Distortion Op Amps


Please check latest availability status for a specific part variant.

Description

The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16-bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain stability and have a small-signal -3dB bandwidth of 150MHz. The MAX4435/MAX4437 are compensated for closed-loop gains of +5 or greater and have a small-signal, -3dB bandwidth of 150MHz.

The MAX4434–MAX4437 op amps require only 15mA of supply current per amplifier while achieving 115dB open-loop gain. Voltage noise density is a low 2.2nV/ and provides 97dB spurious-free dynamic range (SFDR) at 1MHz. These characteristics make these op amps ideal for driving modern, high-speed 14- and 16-bit analog-to-digital converters (ADCs).

These high-speed op amps feature wide-output voltage swings and a high-current output drive up to 65mA. Using a voltage feedback architecture, the MAX4434–MAX4437 meet the requirements of many applications that previously depended on current feedback amplifiers.

The MAX4434/MAX4435 are available in space-saving 5-pin SOT23 packages and the MAX4436/MAX4437 are available in 8-pin µMAX® packages.
MAX4434, MAX4435, MAX4436, MAX4437: Typical Operating Circuit MAX4434, MAX4435, MAX4436, MAX4437: Typical Operating Circuit Enlarge+

Key Features

  • 16-Bit Accurate Settling in 23ns (MAX4435/MAX4437)
  • 97dB SFDR at 1MHz, 4VP-P Output
  • 2.2nV/ Input Voltage Noise Density
  • 100dB (min) Open-Loop Gain
  • 388V/µs Slew Rate (MAX4435/MAX4437)
  • 65mA High Output Drive
  • Available in Space-Saving Packages
    • 5-Pin SOT23 (MAX4434/MAX4435)
    • 8-Pin µMAX (MAX4436/MAX4437)

Applications/Uses

  • High-Performance Receivers
  • High-Speed 14- and 16-Bit ADC Preamplifiers
  • IF/RF Amplifiers
  • Low-Distortion Active Filters
  • Low-Noise Preamplifiers
  • Precision Instrumentation

See parametric specs for Video/Wideband Amplifiers (62)


Part Number# AmplifiersSingle SupplyBW
(MHz)
ISUPPLY
(mA)
IOUT
(mA)
Slew Rate
(V/µs)
en
(nV/√Hz)
AVVSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
(@ -3dB)(typ)(min)(<)(min)(min)(max)(See Notes)
MAX4434 1Yes15015401332.214.55.5-40 to +85
SOIC (N)/8
SOT23/5
$1.34 @1k
MAX4436 21331
SOIC (N)/8
UMAX/8
$4.95 @1k
MAX4437 23885
SOIC (N)/8
UMAX/8
$4.87 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Additional Resources

MAX4435 Macromodel
Request Reliability Report for: MAX4434 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX49140
30ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparator

  • Fast, 30ns Propagation Delay (10mV Overdrive)
  • Low-Power 100μA Supply Current (VDD = 3V)
  • Optimized for 3V and 5V Applications

MAX40108
1V, Low-Power, Precision Operational Amplifier

  • Supply Voltage Range: 0.9V to 3.6V
  • Low 25.5µA Quiescent Current
  • Very Low 1μV (typ) Input Offset Voltage

MAX32000
High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    MAX40027
    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V