MAX44294

36V, Single/Dual/Quad, Low-Noise Amplifiers with Maximum 0.5μV/°C Offset Drift

Lowest Offset Drift in its Class, Offers Unmatched ±8kV ESD Protection and Latch-Up Immunity


Please check latest availability status for a specific part variant.

Description

The MAX44291/MAX44292/MAX44294 are single/dual/quad low-noise, precision operational amplifiers. The low offset and low noise specifications and high supply range make the MAX44291/MAX44292/MAX44294 ideal for sensor interfaces, loop-powered systems, and various types of medical and data acquisition instruments.

The MAX44291/MAX44292/MAX44294 operate with a wide supply voltage range from a 4.5V to 36V single supply or dual ±2.25V to ±18V supplies, and consume only 1.2mA/channel (typ). The MAX44291 features a shutdown input that reduces the supply current to 1µA/channel (typ) when in shutdown mode.

The rail-to-rail output swing maximizes the dynamic range when driving high-resolution ADCs even with low supply voltage. These devices achieve 10MHz of gain-bandwidth product.

The MAX44291/MAX44292/MAX44294 are available in an 8-pin µMAX® (single), 8-pin SO (dual), and 14-pin SO (quad) packages and are specified over the -40°C to +125°C automotive temperature range.
MAX44291: Typical Operating Circuit MAX44291: Typical Operating Circuit Enlarge+

Key Features

  • Low Input Noise and High Bandwidth to Drive Precision ADCs
    • 4.9nV/ Low Input Noise
    • 10MHz Gain-Bandwidth Product
  • Low Input Offset Ensures Accurate Results Over Temperature
    • 125µV (max) Low Input Offset Voltage
    • 0.5µV/°C (max) Offset Drift
  • Low 1.2mA Quiescent Current (Per Channel) Does Not Break the Power Budget
  • ESD Protection Provides Robust Front-End
    • ±8kV Human Body Model
    • ±1kV Charged Device Model
  • Wide Supply for High-Voltage Front-Ends
    • Single 4.5V to 36V or Dual ±2.25V to ±18V Supply Ranges
  • 8-Pin µMAX and 8-/14-Pin SO Packages Save Board Space

Applications/Uses

  • Instrumentation
  • Portable Logic Controllers
  • Sensor Interfaces
  • Test and Measurement Systems
Request Reliability Report for: MAX44294 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX49140
30ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparator

  • Fast, 30ns Propagation Delay (10mV Overdrive)
  • Low-Power 100μA Supply Current (VDD = 3V)
  • Optimized for 3V and 5V Applications

MAX40108
1V, Low-Power, Precision Operational Amplifier

  • Supply Voltage Range: 0.9V to 3.6V
  • Low 25.5µA Quiescent Current
  • Very Low 1μV (typ) Input Offset Voltage

MAX32000
High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    MAX40027
    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V