MAX44269EVKIT

Evaluation Kit for the MAX44269


Please check latest availability status for a specific part variant.

Description

The MAX44269 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX44269 dual comparator in a 1.3mm x 1.3mm wafer-level package (WLP). The EV kit circuit can be easily configured by installing shunts and changing a few components to support multiple comparator application circuits, such as window detector, jack detection, relaxation oscillator, pulse-width modulated (PWM) generator, logic-level translator, or power-on-reset circuit. The EV kit provides 0603 component PCB pads for ease of evaluation. The EV kit circuit operates from a +1.8V to +5.5V VCC supply.

Key Features

  • 1.8V to 5.5V Input Voltage-Supply Range
  • Configurable for:
    • Window Detector
    • Jack Detection
    • Relaxation Oscillator
    • PWM Generator
    • Logic-Level Translator
    • Power-on-Reset Circuit
  • Evaluates 9-Bump WLP Package
  • Proven PCB Layout
  • Fully Assembled and Tested

Applications/Uses

  • Battery-Operated Sensors
  • Notebooks
  • Portable Medical Mobile Accessories
  • Smartphones
  • Two-Cell Battery-Powered Devices
  • Ultra-Low-Power Systems
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX32000
High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    MAX40027
    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V