MAX4383
Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable
MyMaxim SubscriptionsProduct Details
Key Features
Applications/Uses
| # Amplifiers | 4 |
| BW (MHz) (@ -3dB) | 210 |
| Slew Rate (V/µs) | 485 |
| BW (MHz) (0.1dB min) | 55 |
| Large Signal BW (MHz) | 175 |
| Feedback | Voltage |
| Rail to Rail | Output |
| ISUPPLY (mA) (typ) | 5.5 |
| Single Supply | Yes |
| VOFFSET (mV) (max) | 20 |
| IBIAS (µA) (max) | 20 |
| Oper. Temp. (°C) | -40 to +85 |
| Package/Pins | SOIC (N)/14 TSSOP/14 |
| Budgetary Price (See Notes) | 2.48 |
Simplified Block Diagram
Technical Docs
| Data Sheet | Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable | Jun 18, 2003 | |
| App Note | Low-Cost Quad Op Amp Drives RF Modulator |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Parameters
| # Amplifiers | 4 |
| BW (MHz) (@ -3dB) | 210 |
| Slew Rate (V/µs) | 485 |
| BW (MHz) (0.1dB min) | 55 |
| Large Signal BW (MHz) | 175 |
| Feedback | Voltage |
| Rail to Rail | Output |
| ISUPPLY (mA) (typ) | 5.5 |
| Single Supply | Yes |
| VOFFSET (mV) (max) | 20 |
| IBIAS (µA) (max) | 20 |
| Oper. Temp. (°C) | -40 to +85 |
| Package/Pins | SOIC (N)/14 TSSOP/14 |
| Budgetary Price (See Notes) | 2.48 |
Key Features
- Low Cost and High Speed:
- 210MHz -3dB Bandwidth
- 55MHz 0.1dB Gain Flatness
- 485V/µs Slew Rate
- Disable Mode Places Outputs in High-Impedance State
- Single +4.5V to +11V Operation
- Rail-to-Rail Outputs
- Input Common-Mode Range Extends Beyond VEE
- Low Differential Gain/Phase: 0.02%/0.08°
- Low Distortion at 5MHz
- -65dBc SFDR
- -63dB Total Harmonic Distortion
- Ultra-Small 6-Pin SC70, 6-Pin SOT23, 10-Pin µMAX®, 14-Pin TSSOP, and 20-Pin TSSOP Packages
Applications/Uses
- Analog-to-Digital Converter Interface
- Battery-Powered Instruments
- CCD Imaging Systems
- Digital Cameras
- Set-Top Boxes
- Surveillance Video Systems
- Video Line Driver
- Video Routing and Switching Systems
- Video-on-Demand
Description
The MAX4380–MAX4384 require only 5.5mA of quiescent supply current per op amp while achieving a 210MHz -3dB bandwidth, 55MHz 0.1dB gain flatness and a 485V/µs slew rate. These devices are an excellent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instrumentation.
The MAX4380 single with disable is available in an ultra-small 6-pin SC70 package.
Technical Docs
| Data Sheet | Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable | Jun 18, 2003 | |
| App Note | Low-Cost Quad Op Amp Drives RF Modulator |
Support & Training
Search our knowledge base for answers to your technical questions.
Filtered SearchOur dedicated team of Applications Engineers are also available to answer your technical questions. Visit our support portal .
Sampling:
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Request a Quote