MAX4362

ADSL Drivers/Receivers for Customer Premise Equipment

Industry's Smallest +5V ADSL Drivers and Driver/Receiver


Please check latest availability status for a specific part variant.

Description

The MAX4361/MAX4362/MAX4363 are a family of high-performance ADSL drivers and drivers/receivers ideal for the upstream transmit path and the downstream receive path of customer premise equipment. These devices operate from a single 5V supply and deliver up to 12.5dBm average line power for DMT modulated signals, meeting the requirements of full-rate ADSL. Spurious-free dynamic range (SFDR) at full output power is typically -75dBc at 100kHz.

The MAX4361 is a differential IN/differential OUT driver with a fixed gain of 3.1V/V. The MAX4362 is a dual amplifier with shutdown intended for use as a differential IN/differential OUT driver with gain set with external resistors. The MAX4363 is a quad amplifier with shutdown intended for use as a differential IN/differential OUT driver/receiver combination with gain set with external resistors.

The MAX4361 is offered in a space-saving 8-pin µMAX® package.
MAX4361, MAX4362, MAX4363: Typical Operating Circuit MAX4361, MAX4362, MAX4363: Typical Operating Circuit Enlarge+

Key Features

  • Low-Noise Driver
    • 4.8nV per root-Hz Voltage-Noise Density
    • 1.5pA per root-Hz Current-Noise Density
  • Full-Rate ADSL ATU-R Line Drivers and Receivers
  • Single 5V Supply
  • -75dBc SFDR at Full Output Power at 100kHz
  • -95dB Driver-to-Receiver Crosstalk (MAX4363)
  • +12.5dBm Average Line Power (DMT)
  • 280mA (min) Peak Output Current
  • Rail-to-Rail Output Swing
  • Thermal and Short-Circuit Protection

Applications/Uses

  • ADSL Line Interface
  • HDSL Line Driver
Part NumberFunctionsBW
(MHz)
VSUPPLY
(V)
ICC
(mA)
IOUT
(mA)
Slew Rate
(V/µs)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
@ -3dBtypminSee Notes
MAX4362 Driver6052228030
SOIC (N)/14
UMAX/10
-40 to +85$2.09 @1k
See All Video/Wideband Line Drivers/Receivers (6)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Request Reliability Report for: MAX4362 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX4362EUB+
  • MAX4362EUB+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX3522B
    DOCSIS 3.1 Programmable-Gain Amplifier

    • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
    • Covers 5MHz–204MHz Output Bandwidth
    • Dual Outputs Eliminates Need for an External RF Switch

    MAX49017
    1.7V, Dual microPower Comparator with Built-In Reference

    • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
    • Internal Precision Reference Saves Space and Cost of an External Reference
    • < 1% at Room Temperature, < 2.5% Over Temperature Reference

    MAX40660
    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660

    MAX40661
    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660