MAX4281

SOT23, Rail-to-Rail, Fixed-Gain GainAmps/Open-Loop Op Amps


Please check latest availability status for a specific part variant.

Description

The MAX4174/MAX4175/MAX4274/MAX4275 GainAmp family combines a low-cost rail-to-rail op amp with precision internal gain-setting resistors and VCC/2 biasing. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume only 300µA. GainAmp amplifiers are optimally compensated for each gain version, achieving exceptional GBW products up to 23MHz (AV = +25V/V to +101V/V). High-voltage fault protection withstands µ17V at either input without excessive current draw.

Three versions are available in this amplifier family: single/dual/quad open-loop, unity-gain stable (MAX4281/MAX4282/MAX4284); single/dual fixed gain (MAX4174/MAX4274); and single/dual fixed gain plus internal VCC/2 bias at the noninverting input (MAX4175/MAX4275), which simplifies input biasing in single-supply designs. The input common-mode voltage range of the open-loop amplifiers extends from 150mV below the negative supply to within 1.2V of the positive supply. The outputs can swing rail-to-rail and drive a 1kΩ load while maintaining excellent DC accuracy. The amplifier is stable for capacitive loads up to 470pF.
MAX4174, MAX4175, MAX4274, MAX4275, MAX4281, MAX4282, MAX4284: Typical Operating Circuit MAX4174, MAX4175, MAX4274, MAX4275, MAX4281, MAX4282, MAX4284: Typical Operating Circuit Enlarge+

Key Features

  • GainAmp Family Provides Internal Precision Gain-Setting Resistors in SOT23 (MAX4174/5)
  • 0.1% Gain Accuracy (RF/RG) (MAX4174/5, MAX4274/5)
  • 54 Standard Gains Available (MAX4174/5, MAX4274/5)
  • Open-Loop Unity-Gain-Stable Op Amps (MAX4281/2/4)
  • Rail-to-Rail Outputs Drive 1kΩ Load
  • Internal VCC/2 Biasing (MAX4175/MAX4275)
  • +2.5V to +5.5V Single Supply
  • 300µA Supply Current
  • Up to 23MHz GBW Product
  • Fault-Protected Inputs Withstand ±17V
  • Stable with Capacitive Loads Up to 470pF with No Isolation Resistor

Applications/Uses

  • Cellular Handsets
  • Digital Cameras (DIGICAMs)
  • Glucose Meters
  • GPS Solutions
  • Infrared Receivers for Remote Controls
  • Instruments, Terminals, and Bar-Code Readers
  • IP Camera
  • Keyless Entry
  • Low-Side Current-Sense Amplifiers
  • MP3 and Portable Media Players
  • Photodiode Preamps
  • Portable Instruments
  • Smart-Card Readers
Part NumberAmps.Rail to RailVSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Amp.
(µA)
VOS
(µV)
CMRR @DC
(dB)
PSRR @DC
(dB)
Input IBIAS
(nA)
Unity Gain BW
(MHz)
Slew Rate
(V/µs)
en
(nV/√Hz)
Package/PinsBudgetary
Price
minmaxtypmaxtyptypmaxtyptyp<See Notes
MAX4281 1Output Only2.55.5300200090901020.790
SOIC (N)/8
SOT23/5
$1.19 @1k
MAX4282 2
SOIC (N)/8
UMAX/8
$1.69 @500
See All Operational Amplifiers (174)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Technical Documents

App Note 700 Fixed-Gain Op Amps Simplify Filter Design

Quality and Environmental Data

Request Reliability Report for: MAX4281 
Lead-Free Package Tin (Sn) Whisker Reports

CAD Symbols and Footprints

  • MAX4281ESA+
  • MAX4281EUK+
  • MAX4281EUK+T
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX3522B
    DOCSIS 3.1 Programmable-Gain Amplifier

    • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
    • Covers 5MHz–204MHz Output Bandwidth
    • Dual Outputs Eliminates Need for an External RF Switch

    MAX49017
    1.7V, Dual microPower Comparator with Built-In Reference

    • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
    • Internal Precision Reference Saves Space and Cost of an External Reference
    • < 1% at Room Temperature, < 2.5% Over Temperature Reference

    MAX40660
    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660

    MAX40661
    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660