MAX4268

Ultra-Low-Distortion, Single-Supply, 300MHz Op Amps with Enable

Lowest-Distortion Single +5V 300MHz ADC Drivers


Please check latest availability status for a specific part variant.

Description

The MAX4265–MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100Ω load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) performance: -90dBc at 5MHz and -59dBc at 100MHz (MAX4269). Additionally, input voltage noise density is 8nV/ while operating from a single +4.5V to +8.0V supply or from dual ±2.25V to ±4.0V supplies. These features make the MAX4265–MAX4270 ideal for use in high-performance communications and signal-processing applications that require low distortion and wide bandwidth.

The MAX4265 single and MAX4268 dual amplifiers are unity-gain stable. The MAX4266 single and MAX4269 dual amplifiers are compensated for a minimum stable gain of +2V/V, while the MAX4267 single and MAX4270 dual amplifiers are compensated for a minimum stable gain of +5V/V.

For additional power savings, these amplifiers feature a low-power disable mode that reduces supply current and places the outputs in a high-impedance state. The MAX4265/MAX4266/MAX4267 are available in a space-saving 8-pin µMAX® package, and the MAX4268/MAX4269/MAX4270 are available in a 16-pin QSOP package.
MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270: Pin Configurations MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270: Pin Configurations Enlarge+

Key Features

  • Operates from +4.5V to +8.0V
  • Superior SFDR with 100Ω Load
    • -90dBc (fC = 5MHz)
    • -59dBc (fC = 100MHz)
  • 35dBm IP3 (fC = 20MHz)
  • 8nV/ Voltage Noise Density
  • 100MHz 0.1dB Gain Flatness (MAX4268)
  • 900V/µs Slew Rate
  • ±45mA Output Driving Capability
  • Disable Mode Places Outputs in High-Impedance State

Applications/Uses

  • Base-Station Amplifiers
  • High-Frequency ADC Drivers
  • High-Frequency Signal Processing
  • High-Speed DAC Buffers
  • IF Amplifiers
  • RF Telecom Applications
Part NumberAmps.Single SupplyBW
(MHz)
ISUPPLY
(mA)
IOUT
(mA)
Slew Rate
(V/µs)
en
(nV/√Hz)
AVVSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
@ -3dBtypmin<minminmaxSee Notes
MAX4265 1Yes4002830900814.58-40 to +85
SOIC (N)/8
UMAX/8
$2.85 @1k
MAX4266 3502
SOIC (N)/8
UMAX/8
See All Video/Wideband Amplifiers (63)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX3522B
DOCSIS 3.1 Programmable-Gain Amplifier

  • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
  • Covers 5MHz–204MHz Output Bandwidth
  • Dual Outputs Eliminates Need for an External RF Switch

MAX49017
1.7V, Dual microPower Comparator with Built-In Reference

  • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
  • Internal Precision Reference Saves Space and Cost of an External Reference
  • < 1% at Room Temperature, < 2.5% Over Temperature Reference

MAX40660
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660

MAX40661
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660