Ultra-Small, Rail-to-Rail I/O with Disable, Single/Dual-Supply, Low-Power Op Amps

Please check latest availability status for a specific part variant.


The MAX4245/MAX4246/MAX4247 family of low-cost op amps offer rail-to-rail inputs and outputs, draw only 320µA of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4245/MAX4247 offer a low-power shutdown mode that reduces supply current to 50nA, and puts the amplifiers' outputs in a high-impedance state. These devices are unity-gain stable with a 1MHz gain-bandwidth product driving capacitive loads up to 470pF.

The MAX4245/MAX4246/MAX4247 family is specified from -40°C to +125°C, making them suitable for use in a variety of harsh environments. The MAX4245 single amplifier is available in ultra-small 6-pin SC70 and space-saving 6-pin SOT23 packages. The MAX4246 dual amplifier is available in 8-pin, SO, SOT23 and µMAX® packages. The MAX4247 dual amplifier comes in a tiny 10-pin µMAX package.
MAX4245, MAX4246, MAX4247: Pin Configurations MAX4245, MAX4246, MAX4247: Pin Configurations Enlarge+

Key Features

  • Rail-to-Rail Input and Output Voltage Swing
  • 50nA (max) Shutdown Mode (MAX4245/MAX4247)
  • 320µA (typ) Quiescent Current Per Amplifier
  • Single +2.5V to +5.5V Supply Voltage Range
  • 110dB Open-Loop Gain with 2kΩ Load
  • 0.01% THD with 100kΩ Load
  • Unity-Gain Stable up to CLOAD = 470pF
  • No Phase Inversion for Overdriven Inputs
  • Available in Space-Saving Packages
    • 6-Pin SC70 or 6-Pin SOT23 (MAX4245)
    • 8-Pin SOT23/SO or 8-Pin µMAX (MAX4246)
    • 10-Pin µMAX (MAX4247)


  • Automotive Sensors
  • Base Station/Wireless Infrastructure
  • Computers: Desktops, Workstations, and Servers
  • Computers: Motherboards
  • Computers: Notebook
  • Electronic Ignition Modules
  • GPS Solutions
  • Infrared Receivers
  • Instruments and Terminals
  • MP3 Docking Stations: Mid Level
  • Portable Communications
  • Programmable Logic Controllers (PLCs)
  • Sensor-Signal Detection
  • Set-Top Boxes
  • Single-Supply Zero-Crossing Detectors
Part NumberAmps.Rail to RailVSUPPLY (Total)
ICC per Amp.
Unity Gain BW
Slew Rate
minmaxtypmaxtyptypmaxtyptyp<See Notes
MAX4245 1Input/Output2.55.5375150060705010.452
$0.76 @1k
MAX4246 2
SOIC (N)/8
$1.06 @1k
MAX4247 2
$1.06 @1k
See All Operational Amplifiers (174)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Product Reliability Reports: MAX4247.pdf 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources

DOCSIS 3.1 Programmable-Gain Amplifier

  • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
  • Covers 5MHz–204MHz Output Bandwidth
  • Dual Outputs Eliminates Need for an External RF Switch

1.7V, Dual microPower Comparator with Built-In Reference

  • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
  • Internal Precision Reference Saves Space and Cost of an External Reference
  • < 1% at Room Temperature, < 2.5% Over Temperature Reference

Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660

Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660