Miniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable

Please check latest availability status for a specific part variant.


The MAX4212/MAX4213 single, MAX4216 dual, MAX4218 triple, and MAX4220 quad op amps are unity-gain-stable devices that combine high-speed performance with Rail-to-Rail outputs. The MAX4213/MAX4218 have a disable feature that reduces power- supply current to 400µA and places the outputs into a high-impedance state. These devices operate from a 3.3V to 10V single supply or from ±1.65V to ±5V dual supplies. The common-mode input voltage range extends beyond the negative power-supply rail (ground in single-supply applications).

These devices require only 5.5mA of quiescent supply current while achieving a 300MHz -3dB bandwidth and a 600V/µs slew rate. Input-voltage noise is only 10nV√Hz and input-current noise is only 1.3pA√Hz for either the inverting or noninverting input. These parts are an excellent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instrumentation. In addition, when disabled, their high-output impedance makes them ideal for multiplexing applications.

The MAX4212 comes in a miniature 5-pin SOT23 package, while the MAX4213/MAX4216 come in 8-pin µMAX® and SO packages. The MAX4218/MAX4220 are available in space-saving 16-pin QSOP and 14-pin SO packages.
MAX4212, MAX4213, MAX4216, MAX4218, MAX4220: Typical Operating Circuit MAX4212, MAX4213, MAX4216, MAX4218, MAX4220: Typical Operating Circuit Enlarge+

Key Features

  • High Speed:
    • 300MHz -3dB Bandwidth (MAX4212/MAX4213)
    • 200MHz -3dB Bandwidth (MAX4216/MAX4218/MAX4220)
    • 50MHz 0.1dB Gain Flatness (MAX4212/MAX4213)
    • 600V/µs Slew Rate
  • Single 3.3V/5.0V Operation
  • Rail-to-Rail Outputs
  • Input Common-Mode Range Extends Beyond VEE
  • Low Differential Gain/Phase: 0.02%/0.02°
  • Low Distortion at 5MHz:
    • -78dBc SFDR
    • -75dB Total Harmonic Distortion
  • High-Output Drive: ±100mA
  • 400µA Shutdown Capability (MAX4213/MAX4218)
  • High-Output Impedance in Off State (MAX4213/MAX4218)
  • Space-Saving SOT23, µMAX, or QSOP Packages


  • Analog-to-Digital Converter Interface
  • Battery-Powered Instruments
  • CCD Imaging Systems
  • Video Line Driver
  • Video Routing and Switching Systems

See parametric specs for Video/Wideband Amplifiers (63)

Part NumberAmps.Single SupplyBW
Slew Rate
Oper. Temp.
@ -3dBtypmin<minminmaxSee Notes
MAX4212 1Yes3005.51206001013.1511-40 to +85
$3.31 @1k
MAX4213 1300
SOIC (N)/8
$2.41 @1k
MAX4216 2200
SOIC (N)/8
$3.57 @1k
MAX4218 3200
SOIC (N)/14
$4.68 @1k
MAX4220 4200
SOIC (N)/14
$5.01 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX4213EVKIT: Evaluation Kit for the MAX4213 and MAX4215
Product Reliability Reports: MAX4216.pdf 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >


Related Resources

Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available Upon Request)
  • Internal Multiplexer

Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V