MAX4163EBL

UCSP, Micropower, Single-Supply, 10V, Rail-to-Rail I/O Op Amps


Please check latest availability status for a specific part variant.

Description

The MAX4162/MAX4163/MAX4164 are single/dual/quad, micropower operational amplifiers that combine an exceptional bandwidth to power consumption ratio with true rail-to-rail inputs and outputs. They consume a mere 25µA quiescent current per amplifier, yet achieve 200kHz gain-bandwidth product and are unity-gain stable while driving any capacitive load. The MAX4162/MAX4163/MAX4164 operate from either a single supply (2.5V to 10V) or dual supplies (±1.25V to ±5V), with an input common-mode voltage range that extends 250mV beyond either supply rail. These amplifiers use a proprietary architecture to achieve a very high input common-mode rejection ratio without the midswing nonlinearities present in other rail-to-rail op amps. This architecture also maintains high open-loop gain and output swing while driving substantial loads.

The combination of excellent bandwidth/power performance, single-supply operation, and miniature footprint makes these op amps ideal for portable equipment and other low-power, single-supply applications. The single MAX4162 is available in 8-pin SO and space-saving 5-pin SOT23 packages. The MAX4163 is available in an 8-pin ultra chip-scale package (UCSP™) and an 8-pin µMAX® or SO package. The MAX4164 is available in a 14-pin SO package.
MAX4162, MAX4163, MAX4163EBL, MAX4164: Typical Application Circuit MAX4162, MAX4163, MAX4163EBL, MAX4164: Typical Application Circuit Enlarge+

Key Features

  • UCSP Package (MAX4163)
  • 1.0pA Typical Input Bias Current
  • Single-Supply Operation from 2.5V to 10V
  • Input Common-Mode Voltage Range Extends 250mV Beyond Either Supply Rail
  • Rail-to-Rail Output Swing
  • 200kHz Gain-Bandwidth Product
  • 25µA Quiescent Current per Amplifier
  • Excellent CMRR, PSRR, and Gain Linearity
  • No Phase Reversal for Overdriven Inputs
  • Unity-Gain Stable
  • Stable with Any Capacitive Load
  • Internally Short-Circuit Protected to Either Rail

Applications/Uses

  • Automotive Electronics
  • Cell Phones
  • Cordless Phones
  • Glucose Meters
  • GPS Solutions
  • Ionization Detectors
  • IP Camera
  • Low-Power, Low-Voltage Equipment
  • Medical Instruments
  • Panel Meters
  • pH Probes
  • Portable Equipment
  • Power Meters
  • Programmable Logic Controllers (PLCs)
Part NumberAmps.Rail to RailVSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Amp.
(µA)
VOS
(µV)
CMRR @DC
(dB)
PSRR @DC
(dB)
Low Input Bias CMOS InputsInput IBIAS
(nA)
Unity Gain BW
(MHz)
Slew Rate
(V/µs)
en
(nV/√Hz)
Package/PinsBudgetary
Price
minmaxtypmaxtyptypmaxtyptyp<See Notes
MAX4162 1Input/Output2.510253000100110Yes0.10.20.11580
SOIC (N)/8
SOT23/5
$1.68 @1k
MAX4163 24000
SOIC (N)/8
UCSP (B)/9
UMAX/8
$1.93 @1k
See All Operational Amplifiers (174)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Quality and Environmental Data

Request Reliability Report for: MAX4163EBL 
Lead-Free Package Tin (Sn) Whisker Reports
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX3522B
DOCSIS 3.1 Programmable-Gain Amplifier

  • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
  • Covers 5MHz–204MHz Output Bandwidth
  • Dual Outputs Eliminates Need for an External RF Switch

MAX49017
1.7V, Dual microPower Comparator with Built-In Reference

  • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
  • Internal Precision Reference Saves Space and Cost of an External Reference
  • < 1% at Room Temperature, < 2.5% Over Temperature Reference

MAX40660
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660

MAX40661
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660