MAX40659

Transimpedance Amplifier with 100mA Input Current Clamp for LiDAR Applications

TIA Ideal for Industrial and Automotive LIDAR Applications


Please check latest availability status for a specific part variant.

Description

The MAX40658 and MAX40659 are transimpedance amplifiers for optical distance measurement receivers for LiDAR applications. Low noise, high gain, low group delay, and fast recovery from overload make these parts ideal for distance-measurement applications.

Important features include 45nARMS input-referred noise, an internal 100mA clamp, 18kΩ (MAX40658) and 36kΩ (MAX40659) transimpedance, and greater than 360MHz bandwidth. An offset input allows adjustment of input offset current. Operating from a +3.3V supply, the MAX40658 and MAX40659 consume only 70mW.

The MAX40658 and MAX40659 are available in a 3mm x 3mm, 8-pin TDFN package or bare die, and are specified over the -40°C to 85°C operating temperature range.
MAX40658, MAX40659: Simplified Block Diagram MAX40658, MAX40659: Simplified Block Diagram Enlarge+

Key Features

  • 45nARMS Noise
  • Two Transimpedance Values Available
    • 18kΩ (MAX40658)
    • 36kΩ (MAX40659)
  • 360MHz Minimum Bandwidth
  • Internal Clamp For Input Current Up To 100mA
  • Offset Adjust Input
  • 70mW Power Dissipation
  • 3.3V Operation

Applications/Uses

  • Autonomous Driving Systems
  • Industrial Safety Systems
  • LIDAR Receivers
  • Optical Distance Measurement
Part NumberAmps.AV
(V/V)
VSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Amp.
(µA)
Unity Gain BW
(MHz)
Package/PinsBudgetary
Price
minmaxtyptypSee Notes
MAX40658 1180002.973.6321000520
See Data Sheet
$2.78 @1k
MAX40659 
18000
36000
TDFN/8
$3.83 @1k
See All Operational Amplifiers (174)

Part NumberTarget Oper. Range
(Gbps)
Data Rate
(Mbps)
VSUPPLY
(V)
ICC
(mA)
Input Noise
(nA)
Bandwidth
(MHz)
IIN
(µA)
ZT
(kΩ)
Package/Pins
mintypmaxminmax
MAX40658 100 to 5203603.3214536010018
TDFN/8
MAX40659 36
See Data Sheet
See All Transimpedance Amplifiers (TIA) (15)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX40658EVKIT: Evaluation Kit for the MAX40658

Quality and Environmental Data

Request Reliability Report for: MAX40659 
Lead-Free Package Tin (Sn) Whisker Reports

Tools & Models

  • MAX40659 Orcad Library
  • Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX3522B
    DOCSIS 3.1 Programmable-Gain Amplifier

    • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
    • Covers 5MHz–204MHz Output Bandwidth
    • Dual Outputs Eliminates Need for an External RF Switch

    MAX49017
    1.7V, Dual microPower Comparator with Built-In Reference

    • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
    • Internal Precision Reference Saves Space and Cost of an External Reference
    • < 1% at Room Temperature, < 2.5% Over Temperature Reference

    MAX40660
    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660

    MAX40661
    Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available UponRequest)
    • MAX40660