MAX40200EVKIT

Evaluation Kit for the MAX40200


Please check latest availability status for a specific part variant.

Description

The MAX40200 evaluation kit (EV kit) provides a proven design to evaluate the MAX40200 “ideal-diode”. This EV kit demonstrates the MAX40200 in a tiny, space-saving 4-bump wafer-level package (WLP). The MAX40200 is also available in a 5-pin SOT23 (MAX40200AUK+), which is not compatible with this EV kit.

The MAX40200 EV kit PCB comes with two MAX40200ANS+ devices installed. The MAX40200 device is a current-switch, which drops so little voltage as to approximate an “ideal diode”.

The MAX40200 parts are available in a tiny 0.73mm × 0.73mm 4-bump WLP with a 0.35mm bump pitch and is only 0.5mm high. It operates over the extended -40°C to +125°C temperature range.

Key Features

  • Drops Less Than 45mV at 500mA
  • Less than 2µA Leakage When Reverse-Biased
  • Supply Voltage Range: Between 1.5V and 5.5V
  • Low Supply Quiescent Current: 7µA (typ), 18µA (max)
  • Thermally Self-Protecting
  • Tiny 0.73mm × 0.73mm 4-bump WLP
  • -40°C to +125°C Temperature Range
  • Evaluates MAX40200ANS+
  • Accommodates Easy-to-Use Components
  • Proven PCB Layout
  • Fully Assembled and Tested

Applications/Uses

  • Cellular Phones
  • Electronic Toys
  • Notebook and Tablet Computers
  • Portable Media Players
  • Portable/Wearable Medical Devices
  • USB-Powered Peripherals
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX40025C
280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V

MAX40026
280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

  • Fast Propagation Delay: 280ps, Typ
  • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
  • Supply Voltage 2.7V to 3.6V

MAX40056T
Bidirectional Current Sense Amplifier with PWM-Rejection

  • Fast, 2μs PWM Edge recovery (1%) from 500V/μs PWM Edges
  • 60dB AC CMRR Rejection at 50V, ±500V/μs PWM Edges
  • 140dB DC CMRR Rejection

MAX40056F
Bidirectional Current Sense Amplifier with PWM-Rejection

  • Fast, 2μs PWM Edge recovery (1%) from 500V/μs PWM Edges
  • 60dB AC CMRR Rejection at 50V, ±500V/μs PWM Edges
  • 140dB DC CMRR Rejection

MAX40056U
Bidirectional Current Sense Amplifier with PWM-Rejection

  • Fast, 2μs PWM Edge recovery (1%) from 500V/μs PWM Edges
  • 60dB AC CMRR Rejection at 50V, ±500V/μs PWM Edges
  • 140dB DC CMRR Rejection

MAX40242
20V, Low Input Bias-Current, Low-Noise, Dual Op Amp

  • 2.7V to 20V Single Supply or ±1.35V to ±10V Dual Supplies
  • 2pA (Max) Input Bias Current
  • 5nV/√Hz Input Voltage Noise