MAX40200EVKIT

Evaluation Kit for the MAX40200


Please check latest availability status for a specific part variant.

Description

The MAX40200 evaluation kit (EV kit) provides a proven design to evaluate the MAX40200 “ideal-diode”. This EV kit demonstrates the MAX40200 in a tiny, space-saving 4-bump wafer-level package (WLP). The MAX40200 is also available in a 5-pin SOT23 (MAX40200AUK+), which is not compatible with this EV kit.

The MAX40200 EV kit PCB comes with two MAX40200ANS+ devices installed. The MAX40200 device is a current-switch, which drops so little voltage as to approximate an “ideal diode”.

The MAX40200 parts are available in a tiny 0.73mm × 0.73mm 4-bump WLP with a 0.35mm bump pitch and is only 0.5mm high. It operates over the extended -40°C to +125°C temperature range.

MAX40200EVKIT: Board Photo MAX40200EVKIT: Board Photo Enlarge+

Key Features

  • Drops Less Than 45mV at 500mA
  • Less than 2µA Leakage When Reverse-Biased
  • Supply Voltage Range: Between 1.5V and 5.5V
  • Low Supply Quiescent Current: 7µA (typ), 18µA (max)
  • Thermally Self-Protecting
  • Tiny 0.73mm × 0.73mm 4-bump WLP
  • -40°C to +125°C Temperature Range
  • Evaluates MAX40200ANS+
  • Accommodates Easy-to-Use Components
  • Proven PCB Layout
  • Fully Assembled and Tested

Applications/Uses

  • Cellular Phones
  • Electronic Toys
  • Notebook and Tablet Computers
  • Portable Media Players
  • Portable/Wearable Medical Devices
  • USB-Powered Peripherals
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX3522B
DOCSIS 3.1 Programmable-Gain Amplifier

  • Delivers +68dBmV Output Power While Meeting DOCSIS 3.1 Requirements
  • Covers 5MHz–204MHz Output Bandwidth
  • Dual Outputs Eliminates Need for an External RF Switch

MAX49017
1.7V, Dual microPower Comparator with Built-In Reference

  • microPower Operating Current (Total 1.35μA (Typ), 2.55μA (Max)) Preserves Battery Power
  • Internal Precision Reference Saves Space and Cost of an External Reference
  • < 1% at Room Temperature, < 2.5% Over Temperature Reference

MAX40660
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660

MAX40661
Transimpedance Amplifier with 100mA Input Current Clamp for Automotive LiDAR

  • AEC-Q100
  • Enables ASIL Compliance (FMEDA Available UponRequest)
  • MAX40660