MAX40200

Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage Drop

Current Switch/Ideal Diode Saves Space and Offers 10x Lower Voltage Drop Than Schottkys


Please check latest availability status for a specific part variant.

Description

The MAX40200 is an ideal diode current-switch that drops so little voltage that it approaches an order of magnitude better than Schottky diodes.

When forward-biased and enabled, the MAX40200 conducts with as little as 85mV of voltage drop while carrying currents as high as 1A. Typical voltage drop is 43mV at 500mA, with the voltage drop increasing linearly at higher currents. The MAX40200 thermally protects itself, and any downstream circuitry, from overtemperature conditions.

When disabled (EN = low) the MAX40200 blocks voltages up to 6V in either direction, making it suitable for most low-voltage, portable electronic devices. The MAX40200 operates from a supply voltage of 1.5V to 5.5V.

The MAX40200 is available in a tiny, 0.73mm X 0.73mm, 4-bump wafer-level package (WLP), with a 0.35mm bump pitch and only 0.5mm high and 5-pin SOT-23 package. The MAX40200 operates over the extended -40°C to +125°C temperature range.

Design Solution: Cut Your Losses—With an Ideal Diode ›

Design Solution: Design a Cooler, Safer Smart-Home Hub—Using an Ideal Diode ›


How to Add a Diode ORing or Battery Backup Circuit Using the MAX40200 Ideal Diode

MAX40200: Functional Diagram and Package MAX40200: Functional Diagram and Package Enlarge+

Key Features

  • Save Critical Voltage Drop in Portable Application
    • Drops Less Than 43mV at 500mA; 85mV at 1A
  • Longer Battery Life
    • Low Leakage When Reverse-Biased: 70nA (Typ), 1.5µA (Max)
    • Low Supply Quiescent Current: 7µA (Typ), 18µA (Max)
  • Saves Space Over Larger Schottky Diodes
    • Tiny 0.73mm x 0.73mm 4-bump WLP
    • SOT23-5 Package
  • Supply Voltage Range 1.5V to 5.5V
  • Thermally Self-Protecting
  • -40°C to +125°C Temperature Range

Applications/Uses

  • Cellular Phones
  • Electronic Toys
  • Notebook and Tablet Computers
  • Portable Media Players
  • Portable/Wearable Medical Devices
  • USB-Powered Peripherals

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX40200EVKIT: Evaluation Kit for the MAX40200
Request Reliability Report for: MAX40200 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX40204
36V, Pin-Programmable Gain, Bidirectional CSA

  • -0.1V to 36V Wide Input Common Mode
  • Ultra-Low, 2μV Input Offset Voltage
  • On-the-Fly Gain Setting Input

MAX49140
30ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparator

  • Fast, 30ns Propagation Delay (10mV Overdrive)
  • Low-Power 100μA Supply Current (VDD = 3V)
  • Optimized for 3V and 5V Applications

MAX40108
1V, Low-Power, Precision Operational Amplifier

  • Supply Voltage Range: 0.9V to 3.6V
  • Low 25.5µA Quiescent Current
  • Very Low 1μV (typ) Input Offset Voltage

MAX32000
High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available upon Request)
    • Internal Multiplexer