MAX40006

Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP

Save Power and Board Space—Op Amp Consumes Only 4.5µA and Offers 300kHz BW in 0.73mm x 1.07mm WLP and SOT-23


Please check latest availability status for a specific part variant.

Description

The MAX40006 op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered applications such as handsets, tablets, notebooks, and portable medical equipment. This CMOS op amp features an ultra-low input-bias current of 1pA, rail-to-rail input and output, low supply current of 4.5µA, and operates from a single 1.7V to 5.5V supply. For additional power conservation, the IC also features a low-power shutdown mode that reduces supply current to 0.1µA and puts the amplifier’s outputs in a high-impedance state. This device is unity-gain stable with a 300kHz GBW product.

The MAX40006 is available in a space-saving, 0.73mm x 1.07mm, 6-bump wafer-level package (WLP), as well as a 6-pin SOT-23 package. The device is specified over the -40°C to +125°C automotive operating temperature range.
MAX40006: Functional Block Diagram MAX40006: Functional Block Diagram Enlarge+

Key Features

  • 300kHz GBW
  • Ultra-Low 4.5µA Supply Current
  • Single 1.7V to 5.5V Supply Voltage Range
  • Ultra-Low 1pA Input Bias Current
  • Rail-to-Rail Input and Output Voltage Ranges
  • Low ±200µV Input Offset Voltage
  • Low 0.1µA Shutdown Current
  • High-Impedance Output During Shutdown
  • Unity-Gain Stable
  • Available in Tiny, 0.73mm x 1.07mm, 6-Bump WLP and SOT-23 Packages
  • -40°C to +125°C Temperature Range

Applications/Uses

  • Electronic Toys
  • Portable Media Players
  • Portable Medical Devices
  • Tablet/Notebook Computers
  • Wearable Fitness Devices

See parametric specs for Operational Amplifiers (177)


Part Number# AmplifiersRail to RailICC per Amp.
(µA)
VSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
VOS
(µV)
CMRR @DC
(dB)
PSRR @DC
(dB)
Input IBIAS
(nA)
Unity Gain BW
(MHz)
Slew Rate
(V/µs)
en
(nV/√Hz)
Package/PinsBudgetary
Price
(typ)(min)(max)(max)(typ)(typ)(max)(typ)(typ)(<)(See Notes)
MAX40006 1Input/Output4.51.75.51000506530.30.14440
SOT23/6
THIN WLP/6
$0.64 @1k

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

MAX40006EVKIT: Evaluation Kit for the MAX40006

Tools & Models

  • MAX40006M Orcad Library
  • Request Reliability Report for: MAX40006 
    Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

    Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

    Quality Management System >
    Environmental Management System >

     
    Status:
    Package:
    Temperature:

    Related Resources


    MAX49140
    30ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparator

    • Fast, 30ns Propagation Delay (10mV Overdrive)
    • Low-Power 100μA Supply Current (VDD = 3V)
    • Optimized for 3V and 5V Applications

    MAX40108
    1V, Low-Power, Precision Operational Amplifier

    • Supply Voltage Range: 0.9V to 3.6V
    • Low 25.5µA Quiescent Current
    • Very Low 1μV (typ) Input Offset Voltage

    MAX32000
    High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    MAX40027
    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V