MAX400

Ultra-Low Offset Voltage Operational Amplifier


Please check latest availability status for a specific part variant.

Description

The MAX400 guaranteed maximum 10µV offset error is the lowest input offset voltage of any commercially available (nonchopper) monolithic amplifier. The MAX400 represents a 2.5 times improvement over the highest grade OP07 (the OP07A), and a 5 times improvement over the best commercial temperature range device (OP07E). The offset voltage drift is guaranteed to be a maximum of 0.3µV/°C which is also an improvement over the OP07 family.

For the ultimate in DC performance (5µV maximum offset voltage and 0.05µV/°C maximum offset voltage drift) the MAX420 and MAX430 series of ±15V monolithic, chopper-stabilized amplifiers should be consulted.
MAX400: Typical Operating Circuit MAX400: Typical Operating Circuit Enlarge+

Key Features

  • Ultra-Low Offset Voltage: 10µV (max)
  • Ultra-Low Offset Voltage Drift: 0.2µV/°C
  • Ultra Stable vs. Time: 0.2µV/month
  • Ultra-Low Noise: 0.35µVP-P
  • Wide Supply Voltage: ±3V to ±18V
  • High Common-Mode Input: ±14V
  • No External Components Required
  • Fits OP07, AD510, 725, 108A/308A Sockets

Applications/Uses

  • High-Accuracy Data Acquisition
  • Low-Level Signal Processing
  • Medical Instrumentation
  • Precision Amplifiers
  • Strain-Gauge Amplifiers
  • Thermocouple Amplifiers
Request Reliability Report for: MAX400 
Device   Fab Process   Technology   Sample size   Rejects   FIT at 25°C   FIT at 55°C   Material Composition  

Note : The failure rates are summarized by technology and mapped to the associated material part numbers. The failure rates are highly dependent on the number of units tested.

Quality Management System >
Environmental Management System >

 
Status:
Package:
Temperature:

Related Resources


MAX32000
High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive

  • Low Power at High-Speed Maximizes Driver Performance
    • 700mW per Channel
    • 2.57Gbps at +1V Programmed
    • 280ps Typical Rise/Fall Times at +2V (20% to 80%)
  • Integrated Functionality Provides Value-Added Features
    • Programmable Double Time Constant Cable-Droop Compensation
    • Digital Slew-Rate Control for EMI Sensitive Applications
    • Adjustable Output Resistance with 360mΩ Resolution

  • MAX40662
    Quad Transimpedance Amplifier with Input Current Clamp and Multiplexer for LiDAR

    • AEC-Q100
    • Enables ASIL Compliance (FMEDA Available Upon Request)
    • Internal Multiplexer

    MAX40027
    Dual 280ps High-Speed Comparator, Ultra-Low Dispersion with LVDS Outputs

    • Fast Propagation Delay: 280ps, Typ
    • Low Overdrive Dispersion: 25ps (VOD = 10mV to 1V)
    • Supply Voltage 2.7V to 3.6V