ICL7641

 

Part Number	Replacement	Explanation

Description

Create a design and simulate using EE-Sim^® tools:

The ICL761X–ICL764X family of monolithic CMOS op amps combine ultra-low input current with low-power operation over a wide supply voltage range. With pinselectable quiescent currents of 10µA, 100µA, or 1000µA per amplifier, these op amps will operate from ±1V to ±8V power supplies, or from single supplies from 2V to 16V. The CMOS outputs swing to within millivolts of the supply voltages.

The ultra-low bias current of 1pA makes this family of op amps ideal for long time constant integrators, picoammeters, low droop rate sample/hold amplifiers and other applications where input bias and offset currents are critical. A low noise current of 0.01pA and an input impedance of 10¹²Ω ensure optimum performance with very high source impedances in such applications as pH meters and photodiode amplifiers.

ICL761X, ICL762X, ICL763X, ICL764X: Typical Operating Circuit Enlarge+

Key Features

• Pin-for-Pin Second Source
• 1pA Typical Bias Current—4nA (max) at +125°C
• ±1V to ±8V Wide Supply Voltage Range
• Industry-Standard Pinouts
• Programmable Quiescent Currents of 10µA, 100µA, and 1000µA
• Monolithic, Low-Power CMOS Design

Applications/Uses

• Battery-Powered Instruments
• Hearing Aids and Microphone Amplifiers
• Long-Time Constant Integrators
• Low Droop Rate Sample/Hold Amplifiers
• Low-Frequency Active Filters
• Low-Leakage Amplifiers
• Picoammeters