More Current. More Connectivity. More Possibilities.
Automotive infotainment systems provide distribution and playback of audio and video signals. They must frequently display the operating status of the vehicle and external driving information, such as visual navigation directions, location, informational messages, and environmental data. The feature sets required by automotive infotainment systems have expanded greatly over the last decade. We offer a wide range of analog ICs that significantly enhance the performance of these popular automotive systems.
Power Management for Infotainment
Power management ICs for automotive infotainment need to offer high switching frequencies to minimize the solution size. In addition they should minimize electro-magnetic interference (EMI). Typically located in the Radio Head Unit (RHU) and entertainment control modules, these ICs are usually attached directly to the main battery. They should, therefore, be able to handle high input voltages (> 36V) and to reliably survive load dump events through the life of the vehicle.
Liquid crystal displays of many sizes are finding their way into the center console of the modern automobile. These displays require brightness controls with a wide dimming range and must operate in a low EMI environment. Our display power ICs and backlight drivers have been designed with this in mind.
Low-Noise Amplifiers (LNAs)
Our low-noise amplifiers (LNAs) with adjustable gain control capture and process signals at the antenna. We offer solutions for AM/FM/DAB broadcast radio and GPS/GNSS satellite navigation.
We deliver high-integration radio, navigation, and television tuners and receivers for your vehicle infotainment system design.
DAB or Sirius XM tuners convert digital radio signals to digital I/Q output with low power consumption. Digital TV tuners convert broadcast ISDB-T and DVB-T signals to a low-IF signal using a broadband I/Q downconverter. The operating frequency range covers the VHF and UHF broadcast TV bands from 90MHz to 862MHz.
For navigation systems, our complete GPS, GLONASS, Compass, and Galileo front-end IC (MAX2769B) simplifies navigation system design.
Our GMSL serializer-deserializer (SerDes) high-speed video links provide an optimal solution for connecting head-unit video data to rear seat entertainment consoles.
Mobile Device Charging and Protection
Today most vehicle owners have a mobile smart device or transport people who do. These low-power devices frequently become personal entertainment or communication equipment during the drive. Thus, battery charging outlets are becoming standard equipment in most vehicles.
By allowing a driver to devote their full attention to road conditions, accidents can be avoided and lives saved. Safety can be improved by using gesture and proximity sensors instead of knobs and touch screens for car entertainment systems (or vehicle infotainment), and in-car phone calling. These sensors can also be used for side-mirror adjustment, climate control, as well as sunroof and reading lamp adjustment. Our gesture sensors provide swipe and hand-rotation sensing at up to 10x lower cost and 75% smaller size than time-of-flight camera-based systems, with no lagging.
Automotive 100W USB-PD Buck-Boost Port Controller and ProtectorMAX25430
Industry's First Single-IC 100W Automotive USB-PD Power, Charger and Protector
Automotive 40V, 2.2MHz, H-Bridge Buck-Boost ControllerMAX25431
Industry's Lowest IQ Buck-Boost Controller with Best in Class Transient Response
Automotive USB Power Delivery Port ProtectorMAX25410
Industry's First Automotive USB Power Delivery High-Voltage Protector with up to 24V Over-Voltage Protection
Infrared-Based Gesture SensorMAX25205
Data-acquisition system detects hand swipe and finger rotation gestures.
4-Channel, High-Brightness LED Driver with High-Voltage DC-DC Controller and Battery DisconnectMAX16813
Multi-String Driver Provides High Efficiency and Complete Fault Protection While Minimizing External Components
3.12Gbps GMSL SerializersMAX9291/MAX9293
Enables use of coax cables, reducing weight and cost of cabling in automotive infotainment.
3.12Gbps GMSL DeserializersMAX9288/MAX9290
3.12Gbps GMSL Deserializers for Coax or STP Input and MIPI CSI-2 Output
Direct-Conversion DAB TunerMAX2173
Facilitates low-power, tuner-on-board designs
Supports wide frequency range and reduces EMI; perfect for instrument clusters
Robust ESD Protection and Charging ICMAX16970
Automotive connectivity enabled with robust charging
USB Host Charger Adaptor Emulator and DC/DC ConverterMAX16984
Integrates voltage compensation to deliver maximum charge current to portable devices
LED Backlight Driver with Wide Dimming RangeMAX16814
Meets automotive display brightness requirements
Highly integrated automotive PMIC provides three step-down outputs
The block diagrams below make it easy to find the best device for your design. Click a block on any of the following diagrams to view our recommended products.
|Application Note||5837||Auto Radio Head Units: More Demands, Harsh Environment Drive Need for Sophisticated Power-Management ICs|
|Application Note||5709||Enable Automotive USB Power: Managing the Increasing Currents, Longer Cables, and Tight Portable-Device Specifications|
|Application Note||5539||Programming Maxim Integrated Meter ICs|
|Application Note||5271||Selecting External Components for an Automotive Dual Remote Antenna Current-Sense LDO/Switch|
|Application Note||4943||Diagnosing Automotive Faults with Class D Audio Amplifiers|