Traditional automotive radio head units are complex, presenting significant design challenges. The head units must accommodate multiple tuners, requiring multiple cables from the antennas. Heat generated by the concentration of electronics may require the use of heatsinks and degrade reliability. The received analog signals pick up noise as they travel from the antenna to the head unit. The monolithic nature of a traditional head unit also implies that any change to the radio features requires at least a partial redesign of the head unit.
Our remote tuner architecture simplifies head unit design while improving radio signal quality and reducing cost, weight and power consumption. Tuners are not located in the head unit, but rather are located close to the antennas. Received signals are serialized and sent to the head unit over a single coax cable which also provides I2C communication and power. This results in a smaller, cooler head unit and a dramatic reduction in the number of cables. The digital signals are immune to ambient noise which improves signal quality and the reception of weak signals. Another advantage of the remote unit architecture is scalability—it’s very easy to add more tuners for background scan and phase diversity without changing the design of the head unit.
In addition, our RF to Bits® radio tuner IC allows the baseband processing to be done in a system-on-chip (SOC) using software. This software defined radio (SDR) approach enables flexible implementations by eliminating the need for a dedicated baseband processor. By simply changing the software, any worldwide radio standard can be supported.
Remote Tuner Advantages
Remote Tuner Solution Chipset
Design Solution: Remote Tuner Architecture Reduces Wiring Weight and Cost While Improving Noise Immunity
Remote Tuner Technology for Automotive Radio
1:57 January 04, 2017
Overcome the Challenges of Automotive Radio Design
5:48 June 19, 2017